Re: Digihome 32" LED TV

Hi again, just been told that the this TV does not have a power light. The PSU board emits a noise a little louder than the background buzz for a few seconds when first powered up. (When working the TV would turn on when plugged in and not go to standby) It also does this when I press the power button on the remote as if it is trying to turn on then giving up!

Re: Digihome 32" LED TV

Thanks for your reply Tom, no I don't get the power / stand by light.

Re: Digihome 32" LED TV

Hi, I have the same Vestel PSU board in a 32" JVC LED TV. I have replaced the 3 top diodes shown in the pic in post 12 as one of them had shorted. The PSU now powers up and I can measure 12.4v on the top lead of the 3 diodes I replaced. However the the TV still does not switch on. I fitted 3 SB5100 diodes, but on further inspection, noted one of the 3 original diodes was a SB5BO. Could this be the problem? Any help greatly appreciated, there does not seem to be any of these boards on eBay at the moment.