Re: Panasonic TC-P60GT30 A board swap
Fantastic... bridging the signals and grounds did the trick. Everything appears to be working properly.
I must express my appreciation for this fantastic resource forum, specifically to TOM66 for your individual help and to tw2005 posts regarding eeprom swaps.
To think I actually repaired my own tv for $50 in parts and no prior tv repair knowledge.
Thank you......
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TC-P60GT30 A board swap
My tcp60gt30 doesnt have any fans. No fans present, no fan connection (A8) on my orig. main board. The replacement board had the connector and a control chip IC5607.
This all because I am using the "wrong" board in my set. However, I seem so close...
Leave a comment:
-
Re: Panasonic TC-P60GT30 A board swap
OK, swapped out IC8902. TV appears to work normally, but for only 4 mins before it shuts down with blink 11. Did a firmware update. Did a self test.
How can I disable this fan check?
Leave a comment:
-
Re: Panasonic TC-P60GT30 A board swap
I think I will swap out IC8902 and report back.
Leave a comment:
-
Panasonic TC-P60GT30 A board swap
Recently we had a big storm. Believe lightning hit close by. My cable box was taken out along with the hdmi port on my receiver and of course my TV showed no signs of life. Upon turning TV on there was no lights, no sound, no relays clicking. Luckily I found this great site. I determined that I needed to replace the A board. Before doing enough reading, I quickly found and purchased a used board (TNPH0915-1-A). I did not realize the importance of suffix and panel size of donor board.
Anyway, I received a TNPH0915-1-A with no suffix from a TC-P50GT30 . My toasted board is a TNPH0915-1-A,...
-
Re: Service manuals available free
Looking for a service manual for a Panasonic TC-P60GT30
Thanks,
Leave a comment:
No activity results to display
Show More
Leave a comment: