Re: LG 60PV450 Z-SUS unavailable...sustitution?

Just took a closer look a the pics I took...the first shows 3 lines, but the 1 on the left has disappeared, leaving just the 2 in pics 2 & 3 taken during the test screen

Re: LG 60PV450 Z-SUS unavailable...sustitution?

Finally found and received new z-sus board. It's actually the Zenith I saw earlier. Installed it and at first had a green "solarized" effect. After checking here, I found a post that talked about the ribbon cables maybe causing this-Spot on, rechecked cables and !!!, I could see my screen again! Checked voltages, everything was within .1-.2 volts. Thanks guys, Y'all gave me the gumption to try this! But and it seems there's always a but, I have a new, hopefully small problem. 2 vertical green lines on screen. They look...

Re: LG 60PV450 Z-SUS unavailable...sustitution?

Just a thought, when the new z-sus arrives, what would be the safest way to adjust initial VZB voltage? Hate to hook it up and destroy something else.Which would be worse- voltage too high or too low?

Re: LG 60PV450 Z-SUS unavailable...sustitution?

Thanks guys for the responses. Ordered a z-sus board, waiting for it to arrive...will check back with results

Re: LG 60PV450 Z-SUS unavailable...sustitution?

Is it possible to test the MOSFETs/IGBTs in circuit since there's a short on the board? Or would I have to take them off to accurately test them? Also while searching for the EAX66076601 board, came across the EAX64232101 board from a Zenith Z60PV220 that looks identical. Can these boards be subbed?...

Hello all,
First post, so I'll ask for patience in advance . TV went out without warning a few days back. Traced down to a burned out IC on the z-sus board (IC216). Can't find any available anywhere, so a couple of questions-

1-Anyone know where I can find one?
2-Is it possible to find and replace the IC?
3-Is there something I should be looking for as the cause of this IC burning out?

Any help would be greatly appreciated. I've enclosed a few pics, but haven't figured out how to notate them yet ...

Re: New Members - please post your introductions here

Hello everyone,
My name is Tony. I came across this site while doing some research on a plasma tv that went south on me. After some of the info I've already gotten from you guys, I'm coming after your brains