Re: Corsair SP2500 parts information required
It was on a side of smd cap near one of the amplifier chips (backside of the board)....
ouroboros
Member
Last Activity: 10-05-2014, 08:36 AM
Joined: 08-22-2014
Location: Rauma
-
Re: Corsair SP2500 parts information required
nevermind the above, found the short that caused the problem and got it working.
Leave a comment:
-
Re: Corsair SP2500 parts information required
Could you measure the resistance between positive and negative of connector CN101 for me?
it's on the amplifier board...
Leave a comment:
-
Re: Corsair SP2500 parts information required
I used 37XR-A and i followed it's manual and it didn't say anything about zeroing. But i did put the leads together before measuring......Leave a comment:
-
Re: Corsair SP2500 parts information required
Did that and my meter showed 0,2nF for the C937.
...
Leave a comment:
-
Re: Corsair SP2500 parts information required
I tried to measure C937 for you, but i would have to remove it from the board. Which i won't be able to do.
Leave a comment:
-
Re: Corsair SP2500 parts information required
R930 has 103 written on it and C937 has no markings on my board. If i was to measure that cap, wouldn't i have to remove it from the board first? If not then i'll measure it for you tomorrow with my ESR60
Leave a comment:
-
Re: Help in finding few replacement capacitors
Yes, i saw a thread of this somewhere, on the amplifier board glue had changed it's colour to brownish and surface had condensation of some kind...
Tips on what to do about that are appreciated.
All of the caps i mentioned are on the amplifier board, i kind of forgot to mention this, sorry.
And big thanks to all of your input on the matter so far. 
...
Last edited by ouroboros; 08-24-2014, 04:03 AM.Leave a comment:
-
Re: Help in finding few replacement capacitors
Finding where to buy isn't really the problem here. It's finding the datasheets for those caps that i mentioned earlier... But i'll guess if no one knows where to find them then i'll have to estimate/guess the ripple current for them.Leave a comment:
-
Help in finding few replacement capacitors
I am currently looking for replacement caps for my corsair sp2500, and i need some advice on replacement caps.
Caps:
1. 4,7uF 100v, Y.C (yang-chung enterprises?), BP (Bipolar), diameter: 10mm and lenght: 14mm
2. 1000uF 50v, Tbor 1011, 105C, diameter: 13,2mm and lenght: 25,2mm
3. 100uF 25v, Tbor 1008, 105C, this one has PET marked on it, diameter: 6,3mm and lenght: 11,5mm -
Re: New Members - please post your introductions here
Hello everyone!Leave a comment:
No activity results to display
Leave a comment: