Re: Hyundai P227d White Screen

And the power board just slid and touched part of the ground on the housing (I saw a spark! :C ) blowing the fuse. So I'll have to jump the fuse for now to test further.

Re: Hyundai P227d White Screen

Don't think it is. Hyundai IT has a pretty terrible site, hard to find any information on it. I do know that the voltage on the red wires going to the LCD panel (next to all the blue ones) is reading the same 6.7v.

On the power supply there is only 1 cable that runs to the display board. It's labeled CN102 (left side of last picture), and it's supposed to have 5v on it but it too has 6.7v. That connector also has a PWM and BLK listed along with a GND.

On the right side there is a smaller 4 pin cable that runs directly to...

I'm at work at the moment but I'll update with pictures in a few hours...

The screen turns on bright white, but if viewed from an angle you can see a very faint shadow of a window or other thing being displayed (its not in color).

With that said, I've checked all the fuses on the power supply board, and checked the caps for shorts (all I have is a multimeter). All seems good on that front and I don't see any heavy bulging or busted caps. The only interesting thing I've found is the output voltage is labeled +5v going to the display board, but it's actually putting...

Re: New Members - please post your introductions here

Hello! My name is Josh. I joined with the intention to seek knowledge and to repair things! We'll see how it goes! On with the journey!