Re: Conductive Ink Pen - how to apply without bridging when there are multiple traces
Hi,
Rather than using conductive ink,I've repaired traces by using thin copper wire ( single strand from hook up wire ) then a drop of glue to hold the wires in place
Pete
Goldieoldie
Member
Last Activity: 06-06-2015, 04:34 PM
Joined: 07-23-2014
Location: Uk
-
Re: Technika LCD37-909
Yes you are right!
There again I've not come across before a tv which has a separate menu button for the digital Tuning !!Leave a comment:
-
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Sorted !
Thanks to everyone for there help
Cure is to use a one for all remote
I used the Urc 6440 which is a good one to have as it is upgrade able
Use one for all code 2426
On this particular remote the key marked text becomes the digital tv menu !
There you can do a first time install to find any new digital channels
Cheers PeteLeave a comment:
-
Re: Technika tuning problem need service code please
Sorted !
Thanks to everyone for there help
Cure is to use a one for all remote
I used the Urc 6440 which is a good one to have as it is upgrade able
Use one for all code 2426
On this particular remote the key marked text becomes the digital tv menu !
There you can do a first time install to find any new digital channels
Cheers PeteLeave a comment:
-
Re: Technika LCD37-909
Sorted !
Thanks to everyone for there help
Cure is to use a one for all remote
I used the Urc 6440 which is a good one to have as it is upgrade able
Use one for all code 2426
On this particular remote the key marked text becomes the digital tv menu !
There you can do a first time install to find any new digital channels
Cheers PeteLeave a comment:
-
Re: Technika LCD37-909
Hi
Thanks for the link
I've tried those codes mentioned but none work!
I think because the code 9735 ( a unc code I think ) works as a hack to change regions for the DVD I gather it's a unc code I need rather than vestel
Anybody out there know what the unc service codes are please ?
Cheers PeteLeave a comment:
-
Re: Technika LCD37-909
Hi tom
Do you know please the service code for UHc tvs please ?
It's a 19 inch LCD DVD combi badged technika model number m19n11n02g 801 or lcd19dvdid307 but I think it's got UHc boards and not vestel as none of their codes seem to work.however the umc code 9735 to hack the DVD works
I want to start the first set up installation as there is no option in the normal menu to do this.Problem is it does not allow tuning in digital mode ( aerial symbol is greyed out ) ,analogue is ok
Be really grateful if you know !
Cheers PeteLeave a comment:
-
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Thanks,but I don't know the factory reset code
Do you know please ?Leave a comment:
-
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Should have said there is no first time installation option in the menuLeave a comment:
-
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Sorry,No I do not have the manual
How do you go about the first time installation please ?Leave a comment:
-
Re: Technika tuning problem need service code please
Sorry,I was waiting for the option to list a new thread
I've replied nowLeave a comment:
-
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Hi
Thanks for your reply.
I have not seen it working in digital mode as it was bought second hand
In digital mode (it's an option in the menu ) it's showing all the usual channels but no signal as it was used in a different location with a different transmitter
I'm hoping a reset in the engineers menu might sort itLeave a comment:
-
Technika tuning problem need service code please
Hi,
I have a technika LCD tv model no. M19n11n02g 801 DVD combi
The other number on it is lcd19dvdid-307
I think it has umc of Slovakia boards inside as the code 9735 ( which I've been told is a umc code ) works to access the DVD region menu
I've tried vestel codes with no luck
All works fine incl analogue Tuning
In digital mode the symbol in the menu for Tunning is greyed out,so cant retune in digital mode
I've tried general reset to no avail
I would like to try a factory reset in the service menu but I can't find the code anywhere
... -
Re: TECHNIKA LCD19DVDID-107 - Stuck in standby
Hi,
I have a technika LCD tv model no. M19n11n02g 801 DVD combi
The other number on it is lcd19dvdid-307
I think it has umc of Slovakia boards inside as the code 9735 ( which I've been told is a umc code ) works to access the DVD region menu
I've tried vestel codes with no luck
All works fine incl analogue Tunning
In digital mode the symbol in the menu for Tunning is greyed out,so cant retune in digital mode
I've tried general reset to no avail
I would like to try a factory reset in the...Leave a comment:
-
Re: New Members - please post your introductions here
Hi,
I'm Pete and have a general interest in electronics .Main interest is old radios ,valve or transistor but no chips!
Get lumbered now and again to repair modern stuff which is a challenge with all those things with lots of legs on !!Leave a comment:
No activity results to display
Leave a comment: