Re: Samsung LE32C450E1W half display
That's the label of the panel, hope it helps....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung LE32C450E1W half display
that's a bad news.. Just to know, where you realize that the problem comes from the panel?...
Leave a comment:
-
Re: Samsung LE32C450E1W half display
here it is. As you can see, only half menu is shown....Last edited by Zizio|Kriminal; 05-18-2016, 12:48 PM.
Leave a comment:
-
Samsung LE32C450E1W half display
Hi! I have a Samsung LE32C450E1W TV and suddenly half screen went black, as you can see in the picture. Picture and backlight seems ok. The TV hasn't a T-CON board, so I tried to reseat cables and checked if there's some capacitor blown, without success. Someone has a suggestion?
Thanks in advance...
-
Re: Samsung LE40C530F1W Flickering
Sorry if I reply only now. Here are some pictures of the boards. Hope this helps....
Leave a comment:
-
Samsung LE40C530F1W Flickering
Hi to all. I have a 40'' Samsung TV (Model number LE40C530F1W) that has a annoying problem: after about 20 minutes since the TV is turned on, the display begin to flicker. I must to turn it off for a while to restore the TV, but the flickering occurs regularly. The power supply, the T-CON Board and the mainboard hasn't any of capacitors blown. What can I do in order to know if the inverter and/or the lamps are in fault?
Thank you in advance, and sorry for my english
-
Re: Samsung S42AX-YB04 click noise
Uh, ok. Seems legit Thank you for your support. Now, all I need is to find the right firmware and a programmer..
Leave a comment:
-
Re: Samsung S42AX-YB04 click noise
the new EEPROM is blank, no firmware was previously installed. But as I read in many threads, in this EEPROM there are stored the settings of the TV, so performing a reset could unbrick the TV..
There's an example:
[url]http://wiki.samygo.tv/index.php5/UnBricking_TV_by_EEPROM_Reset[/url]Re: Samsung S42AX-YB04 click noise<b...the TV..<br />
Leave a comment:
-
Re: Samsung S42AX-YB04 click noise
UPDATE: I've changed the EEPROM of the main board with a new one, nothing happens: same problem. Anyone can help me?
Leave a comment:
-
Re: Samsung S42AX-YB04 click noise
UPDATE: I've read that there's a method to reset the eeprom located in the main board: the way is to shorting EEPROM's pin 5-8. Anyone has already tried that method?
Leave a comment:
-
Re: Samsung S42AX-YB04 click noise
Thanks for your reply. here's some pics of the boards (sorry for the quality of the image)....
Leave a comment:
-
Samsung S42AX-YB04 click noise
Hi folks, I have a problem with my Samsung (Model S42AX-YB04). The TV turn on automatically and a relay makes a click noise every 15-20 seconds but no audio/video. No capacitors are blown in the power supply, and voltages in the power supply, X-Main e Y-Main seems to be OK. I've even tested the T-CON board by shorting the pins 3-4 and disconnecting the LVDS cable, and I see the test color pattern, that seems (i think) that the panel and T-CON board works properly.
Now, my last try is to short the 5-6 pins on the eeprom located on the mainboard in order to reset it, and now the TV remain...
No activity results to display
Show More
Leave a comment: