Re: samsung UN60J620DAFXZA replacement screen



According to samsungparts.com, the panel part number for your TV is BN95-01147F and here is the ebay link for the same panel [url]https://tinyurl.com/y5tgu2of[/url]Re: samsung UN60J620DAFXZA replaceme...y5tgu2of[/url]...

Re: Samsung UN60H7150 no audio/video standby light double blinks

Sorry for the delay but I was out on vacation.
The fuse on t-con was fine. It turned out that I had received a defective main board the first time. A replacement main board fixed the issue.

Re: Samsung UN60H7150 no audio/video standby light double blinks

Tried replacing new main board today. Now the TV power light flashes normally (slow single blinks) and I can hear audio but no picture
I see backlights. Not sure if I was unlucky and got the bad main board or it is the tcon that's bad. I took a chance and ordered a new tcon. Will update here once i get it.

Re: Samsung UN60H7150 no audio/video standby light double blinks



Thank you @jjanssen. Have ordered new board, keeping fingers xed....

Re: Samsung UN60H7150 no audio/video standby light double blinks

Thank you @budm for your reply.
Does the double blinks mean anything? The boot-up sequence for the most of the Samsung's I have seen has a slower single blink.

I am not able to get hold of SM so kind of stuck.

I am trying to fix a Samsung UN60H7150 for a friend and need some help. The red standby led comes on as soon as the tv is pluggned in and it blinks after few seconds. TV does not seem to respond to power on either from remote or from the button on the unit. The red led double blinks 5 times and then stops blinking for few seconds and then double blinks again for 5 times and so on.

The DCV readings on the power board seem right. I was only able to take reading on the odd pin numbers and they all have 13V so I assuming PS_ON is working.

[FONT="Courier New"]...

Re: New Members - please post your introductions here

Hello,

My name is Mike and I am from IL. I am EE major but a software engineer by profession. I like fixing electronics and am thankful to all the people on this forum for the help they have been providing.