Re: Behringer Eurorack UB2442FX-PRO Bad Capacitors

@stj they were Xunda types. I already tossed them. (with malice)

Re: Behringer Eurorack UB2442FX-PRO Bad Capacitors

Huh. I just got this notice from digikey regarding the C7 150uF 400V:

Parts Affected
Manufacturer PANASONIC ELECTRONIC COMPONENTS
Description CAP ALUM 150UF 400V 20% SNAP
Manufacturer Part Number EET-ED2G151CA
Digi-Key Part Number P11649-ND
Status End Of Life
Last Time Buy Date 03/31/2015

Possible Substitutes
Manufacturer Part Number Digi-Key Part Number Description Manufacturer Lead Content RoHS Status
381LR151M400J022 338-2480-ND CAP ALUM 150UF...

Re: Behringer Eurorack UB2442FX-PRO Bad Capacitors

One thing I forgot to mention in my post above. The Panasonic replacements for C12 and C16 (1000 uF/25v) are 30mm tall but the original Xunda caps were 20mm. This is significant in this case. I had to modify the power supply case and even so there was a slight interference between the case and the main board of the mixer. Since I didn't know the original specs of the Xunda caps I trusted the wisdom of the group and bought these panasonic caps but if you can find shorter ones it would be wise.

Re: Behringer Eurorack UB2442FX-PRO Bad Capacitors

I have just saved my Eurorack UB1204FX-PRO from the landfill. Or the other way around I guess. First post here. I must thank those before me who posted on the similar problems in other Behringer equipment. I replaced the caps on the list here but the switcher was not oscillating. So I replaced C10 and C13 and presto. Lucky nothing else was damaged when the supply went out of regulation. I have an updated parts list with digikey references:

C12, C16 1000uF / 25v (10mm dia / 30mm H / 5mm sp) << EEU-FC1E102L / Panasonic...