Re: LG Flatron W2442PA no power
If I'm honest, I only matched the [I]1000uF 16VDC 105C, 10x20x5mm[/I] when ordering.
Will remember the rest for next time!
ThanksRe: LG Flatron W2442PA no power
If I'm honest, I only matched the [I]1000uF 16VDC 105C, 10x20x5mm[/I] when ordering.
Will remember the rest for next time!
ThanksRe: LG Flatron W2442PA no power
If I'm honest, I only matched the [I]1000uF 16VDC 105C, 10x20x5mm[/I] when ordering.
Will remember...
dp197
Member
Last Activity: 07-03-2014, 11:35 AM
Joined: 06-27-2014
Location: Leicester
-
Re: LG Flatron W2442PA no power
And here's my dodgy soldering...Leave a comment:
-
Re: LG Flatron W2442PA no power
Panasonic FM Series. EEUFM1C102 to be exact...Leave a comment:
-
Re: LG Flatron W2442PA no power
Replaced 3 of the 1000uf capacitors (only 2 were bulging)
All working fine now
Leave a comment:
-
Re: LG Flatron W2442PA no power
Thanks for your help, It's appreciated...Leave a comment:
-
Re: LG Flatron W2442PA no power
Not actually sure how to set the meter at 600vdc so I guess I will leave that bit for now.
What I will do is replace the capacitors and go from there?Leave a comment:
-
Re: LG Flatron W2442PA no power
Thanks for the quick reply.
My next question was going to be do I need low ESR or not, So thanks for answering!
Bigger caps look to be ok.
Yes doesn't light up at all. Have tried with another power lead etc so I know that isn't the problem.
Other fuse seems ok too, Getting a reading from it.Leave a comment:
-
LG Flatron W2442PA no power
Hi All
Before I get into it, I have found these 3 threads that have been somewhat helpful, But I've got an additional question
[url]https://www.badcaps.net/forum/showthread.php?t=22981[/url]
[url]https://www.badcaps.net/forum/showthread.php?t=31458[/url]
[url]https://www.badcaps.net/forum/showthread.php?t=25858[/url]
I'm pretty much a newbie when it comes to stuff like this. My dad is an electrician but currently out the country for another week.. (I could wait for him, But I'd rather learn myself sooner or later)
Basically in the...Last edited by dp197; 06-27-2014, 07:44 AM. -
Re: New Members - please post your introductions here
Hi
Just here to ask a few questions on repairing my computer monitor
I have found other threads with the same issue, But I have some different questions to ask!
ThanksLeave a comment:
No activity results to display
Leave a comment: