Re: ADI Microscan A707 & BenQ FP731 LCD's

Hi eguevarae,Thanks for the picture and heads up on what to look for, I'm very new to all of this and appreciate your patience and your time, I will get all of the said items you shown me latter today and replace them all I got to get a result out of that lol, and do you think I should replace those two caps on the ADI board ? might as well it can't hurt right ?. Peace

Re: ADI Microscan A707 & BenQ FP731 LCD's

ok, first the ADI here is all the markings from the two caps [105 degree c] temp it can go to I guess, then [M2026] [EVL] [NKcon] [56UF] [25V] I looked on the BenQ board and could find nothing even close to 5707 or F707, and are the two square box's either side of the brass coil block the fuses you talk of ?. thx for your help.

Re: ADI Microscan A707 & BenQ FP731 LCD's

Hi eguevarae, thanks for the welcome and reply, here are some images, the ADI one, I could be wrong and no dought am, but I think the small board to the right could be my trouble, and of course there is the BenQ I replaced the fuse today I couldn't get the ceramic one so I just got the glass one, any way still only getting the green led to say it is on but black screen, I hope these pics are what you were asking for, if not please let me know. Peace...

Hi All,
I have an annoying issue with a ADI monitor I have, I turn it on it boots up then 20 to 30 seconds latter it goes black, the led is still green but no monitor, turn it of then on, same deal, I have looked at the boards in it for a dry solder or a dead diode or a rounded pot, but nothing that catches my eye, I hope I'm in the right place for this post, and let me say what an impressive forum you lot have here, going to be a great help for future situations I can see that, ( I like playing with things that stop lol )


I also have a BenQ FP731, model Q-7T3,...