Re: Hanns-G HG281D, LCD Monitor no power

after a little more research and checking the board, i think that
[url]https://www.digikey.com/product-detail/en/rubycon/400LEX1MEFC6.3X11/1189-2719-ND/5051848[/url]
can probably squeeze in there and do the job with much better lifetime rating. i'm going to order this and the UCC as a backup in case i can't fit it.Re: Hanns-G HG281D, LCD Monitor no p.../5051848[/url]

Re: Hanns-G HG281D, LCD Monitor no power


ugh, looks like a selection error on my part. thanks, good catch.
slim pickings for 1uF 100v caps.

couple options:
[url]https://www.digikey.com/product-detail/en/nichicon/URZ2A010MDD1TD/493-11540-1-ND/4320420[/url]
[url]https://www.digikey.com/product-detail/en/united-chemi-con/EKMG101ELL1R0ME11D/565-1360-ND/755876[/url]

i would lean towards the nichicon, but the UCC has better high freq ripple current. neither have ESR data. decisions decisions...Re: Hanns-G HG281D, LCD Monitor no...

Re: Hanns-G HG281D, LCD Monitor no power



sounds good. hopefully i'll report back in a week or two with a fixed monitor. thank you!...

Re: New Members - please post your introductions here

Hello. I registered a while ago, finally getting around to making a couple posts.

Re: Hanns-G HG281D, LCD Monitor no power

Hello. I have a HG281D that works fine for a few minutes then the power starts dropping out and screen goes black... no visibly damaged components or bloated caps, seems to be in line with the experiences others have had. I wish to replace the capacitors. After checking my actual boards (PSM217-404-H-R & PM549DA3 M06 ver5.0A) and reading the recommended caps lists and bad caps lists I came up with the following replacements that are in stock at Digikey.

Main Board (PM549DA3 M06 ver5.0A)
[CODE]Qty Cap Voltage Dia...