Re: function?
If anyone cares,,,, I replaced the invertor for 13$ from ebay and it works great now...
spoksta
Member
Last Activity: 08-07-2014, 08:37 AM
Joined: 06-17-2014
Location: JACKSON
-
Re: function?
These were also roughly 24v when I started now the two in blue are still 23-24, the 2 in red are 2.224 also all the cconnectors to the lamps were 14.4 volts now the black one hhas no reading... The pins all still read fine, so the power doard is still functioning isn't it?...Leave a comment:
-
Re: function?
These are fuses right? The were three ohms before the thing I asked in the first post kinna popped? Now the back light doesn't come on at all and they read 15.21 and 23.11 volts now......Leave a comment:
-
Re: function?
Vac I believe, I'm pretty sure I jus killed it :-(Leave a comment:
-
Re: function?
E doesn't read?? I is 23.7 and 14.35??Leave a comment:
-
Re: function?
It appears to run to e-pwm?? I could be wrong I it runs under a connector so I kind of lose it for a minLeave a comment:
-
Re: function?
Is the blue pin 1?? And does the connectors in green look OK? There's quite a few dark spots like that on the board? The other boards look fine visually...Leave a comment:
-
Re: function?
I'm not sure I have the right meter for this, its 0 off 4.17v on, if I reverse the ground and positive. Its 14.13?? Please be patient on this with me......Leave a comment:
-
Re: function?
Sorry I work long hours, but yes I let it play like that's for about 5 mins and everything seemed fine, this is the board...Leave a comment:
-
Re: function?
I tried Google search but wasn't sure what it was talking about :-(Leave a comment:
-
Re: function?
Its on the invertor board? Of a samsung lnt3242hx/xaa, it has sound and picture but no back light, if I jump the terminals together my back light works agaim...Leave a comment:
-
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
You have to do the big set of wires on the side the little ones at the bottom doesn't do anything eitherLeave a comment:
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
Iv got to get In bed 430 comes early, when I get in tomorrow afternoon could someone explain to me what y'all are testing and how I should go about doing this alsoLeave a comment:
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
I unplug my inverter wire and back in and the picture works for about 2 secondsLeave a comment:
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
The one labeled s doesn't do anuthingLeave a comment:
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
Yes TV was turned onLeave a comment:
-
Re: Samsung LN-T3242H works fine for a day, then wont turn on. intermittent.
Mine has the same issue, the second plug does nothing? I have sound still if I unplug the wire to the inverter and plug it back in it will show the picture for around two seconds before going black again??Leave a comment:
No activity results to display
Leave a comment: