Re: Comparing mosfet's

Thanks Redwire I really appreciate the help. I will go ahead and order the SUM110N05 then since it sounds like it will be a better part than the original. That original mosfet being a single avalanche is probably why these modules are all going bad then.

Re: Comparing mosfet's

I'm not sure what data to compare and whether the new one should have higher specs or lower specs to to be a good replacement redwire. I looked at the avalanche data and for the new one I see (current/time and current/temperature) but for the old one all I see is (current/temperature).

Re: Comparing mosfet's

Thanks for taking a look at it Bud. Looking at all those specs was a little overwhelming, I am trying to learn more about that end of the electronics but it takes a while.

Re: Comparing mosfet's

I accidentally put the wrong link on the post here are the links I meant to put up.

This is the link for the substitute
[url]http://www.mouser.com/Search/ProductDetail.aspx?qs=xrZAeqbNnhjGL6ATG%252bMExQ%3d%3d[/url]

This is the link for the obsolete part
[url]http://www.mouser.com/ProductDetail/Vishay/SUB75N06-07L-E3/?qs=%2Fha2pyFadujIZ1aPgbSMgkomzIOtWcAbt%2Fpe3yXHEUMG%252basyIOtVSyHe2ddHNnis[/url]Re: Comparing mosfet's<br /> <br />...I meant to put

I am working on an abs control module, I had found some articles about replacing one of the mosfet's fixing it. The original part number for it seems to be obsolete now and mouser.com offered a substitute. I have a comparison of the two but am not familiar with the specs for these to know if the replacement would be suitable. Any help will be greatly appreciated.

This is the link for the replacement
[url]http://www.mouser.com/Search/ProductDetail.aspx?qs=xrZAeqbNnhjGL6ATG%252bMExQ%3d%3d[/url]

This is the link for the obsolete part [url]http://www.mouser.c...

I am working on an abs control module, I had found some articles about replacing one of the mosfet's fixing it. The original part number for it seems to be obsolete now and mouser.com offered a substitute. I have a comparison of the two but am not familiar with the specs for these to know if the replacement would be suitable. Any help will be greatly appreciated.

[URL="http://www.mouser.com/Search/CompareProducts.aspx"]http://www.mouser.com/Search/CompareProducts.aspx[/URL]I am working on an abs control module, I had found some articles about replacing one of the mosfet's

Re: New Members - please post your introductions here

Hi, i'm Robert, i am an automotive tech and have worked on a lot of auto electrical but not so much on the electronics inside the boxes. This seemed like a good place to learn more about the troubleshooting and testing of electronic components. Thanks for letting me join.