Is this going to be a major problem?
12v is at 11.65
5v is at 4.95
3.3v is at 3.33
2.5v 2.54
vcore 1.5
BossTone74
Member
Last Activity: 04-10-2011, 06:18 PM
Joined: 07-15-2004
Location: Maple Grove, MN
-
Re: Caps Needed for SV25 power supply
which ones?
P10256-ND EEU-FC1C182S CAP 1800UF 16V ELECT FC RADIAL Panasonic - ECG 1800uF 16V ±20% FC Radial Bulk Aluminum 105°C 20634 1.39000
P11207-ND EEU-FC1C182 CAP 1800UF 16V ELECT FC RADIAL Panasonic - ECG 1800uF 16V ±20% FC Radial Bulk Aluminum 105°C 7485 1.78000
any ideas?... -
Re: Caps Needed for SV25 power supply
Thanks for your help!!
on the 16V which one should I get?
[url]http://www.digikey.com/scripts/DkSearch/dksus.dll?Criteria?Ref=287&Site=US&Cat=32178906[/url]
thanks
joshRe: Caps Needed for SV25 power suppl... thanks<br />...Leave a comment:
-
Re: Caps Needed for SV25 power supply
To stay at 16v, the size jumps to 12.5mm starting at 1800μF. could I use that and have it be ok aslong as I have the room?...Leave a comment:
-
Caps Needed for SV25 power supply
I have
10mm wide 2.5 cm tall 1650uf 16v
and 8mm wide 2.5 tall 2200uf 6.3
anyone know where I would get them, or a good alternative....looks like I have room to play... -
Re: My Shuttle FV25 Problems
anyone know which caps on the PSU that need to be repaired and with what?Leave a comment:
-
Re: SV25 Beep codes?
made a bit more progress, when trying to flash the Bios, I get to the A: prompt and when I type the numbers...it's like the shift key or something was being held down...
I cleared the CMOS, got the flash utility working...Flashed it...and it actually worked...this thing is coming back to life!!
Hooked up the hard drive...and it wouldn't detect it...
restarted it, and bam...went right into windows!!
well see how it holds up!
thanks for the ideas and support guys!
*EDIT*...Last edited by BossTone74; 02-09-2006, 06:36 PM.Leave a comment:
-
Re: SV25 Beep codes?
Slight bit of progress...
I tried it with a PCI graphics card and now I got a "bios checksum error" "detecting floppy drive and A media" "insert system disk and press enter" I hit enter and get nothing....
But I do have a display with the PCI card...Leave a comment:
-
Re: SV25 Beep codes?
good question, I don't know, I just knew I was going to recap it so I didn't bother checking it, because all the caps were swollen and looking really bad.
I'll try a PCI card tonight to see if that makes any difference......Leave a comment:
-
Re: SV25 Beep codes?
I'll take another look, anyone else got any ideas?Leave a comment:
-
SV25 Beep codes?
I have recapped three sv25's successfully. I have one more that I just finish and is doesn't seem to work. One Long and Two short Beeps. And then a rumbling sounds through the tiny little speaker that gives the beeps. The fans spin up...no video...I did a little research and found this
Here's the beep codes for Award BIOS:
No Beeps No Power, Loose Card, or Short.
1 Short Beep Normal POST, computer is ok.
2 Short Beep POST error, review screen for error code.
Continuous Beep No Power, Loose Card, or Short.
Repeating Short Beep No Power, Loose... -
Re: Am I on the right track?
It's an Shuttle FV25...Leave a comment:
-
Re: Am I on the right track?
this whole thing just makes me worried I'd be getting the wrong onesLeave a comment:
-
Re: Am I on the right track?
can't someone just tell me the specific ones to get?
PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Last edited by BossTone74; 01-16-2006, 08:38 PM.Leave a comment:
-
Re: Am I on the right track?
another problem that I see is that on digikey they don't seem to list the size...???Leave a comment:
-
Re: Am I on the right track?
WOW I really appreciate the response!!...Leave a comment:
-
Am I on the right track?
I have 3300uf 10v 12.5mm
3300uf 6.3 10mm
1000uf 10v 8mm
[url]http://www.mouser.com/index.cfm?handler=displayproduct&lstdispproductid=565724&e_categoryid=381&e_pcodeid=64703[/url]
[url]http://www.mouser.com/index.cfm?handler=displayproduct&lstdispproductid=568635&e_categoryid=390&e_pcodeid=64704[/url]
[url]http://www.mouser.com/index.cfm?handler=displayproduct&lstdispproductid=565451&e_categoryid=381&e_pcodeid=64703[/url]
Could some check to see if I am ordering the right...
No activity results to display
Leave a comment: