Re: My very first Rework flux by KINGBO Japan
[url]http://www.bgamods.com/forum/viewtopic.php?f=18&t=2404&sid=7050d9b4573ed5874cbf44e93abbaeb7&start=20[/url]Re: My very first Rework flux by KIN...start=20[/url]...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: spectre x322bv-hd model x32 led backlights bad?
[url]http://www.jestineyong.com/lcd-tv-set-with-no-picture-display-repaired-model-infinity-tv-3203inf/[/url]Re: spectre x322bv-hd model x32 led ...3203inf/[/url]
Leave a comment:
-
Re: How bad are my soldering tools?
its an Hakko design
ripoff station
(not reliable and cheap),
tip assortment is large and
original Hakko tips
are reliable, if you
keep them tinned
Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
difference between them is case size
if it gets really hot
<100´c
Rubycon RX (130´c)
will survive there,
if its really hot-hell
desing to begin with
Leave a comment:
-
Re: ? on turning a tv back-light into a sighn
[url]http://www.youtube.com/watch?v=gPpy-HX9wFg[/url]Re: ? on turning a tv back-light int...y-HX9wFg[/url]
Leave a comment:
-
Re: Motherboard recap issue
weller is average, nothing
exciting like Metcal or JBC...
Leave a comment:
-
Re: Motherboard recap issue
radio shack 25w iron
with
conical(default) tip
will get you nowhere
FX-888 with chisel tip
will lead somewhere
where it is possible
to solder and
de-solder
comfortably
Leave a comment:
-
Re: Help with Chaintech system
[url]http://images.highspeedbackbone.net/itemDetails/C460-2016/C460-2016-out12-hl.jpg[/url]
at lower right, below the two vertical IDE slots?Re: Help with Chaintech system<br />...cal IDE slots?Re: Help with Chaintech system
[url]http://images.highspeedbackbone.net/itemDetails/C460-2016/C460-2016-out12-hl.jpg[/url]
at lower right, below the two vertical IDE
Leave a comment:
-
Re: Motherboard recap issue
put some leaded solder
to the rohs-joint beforehand
cap removal and
no preheating
will be required.
Leave a comment:
-
Re: Viewsonic VX900 Bad Inverter
secondary windings for backlight
have high resistance, 200mohm
is a low resistance reading
tabs are where
the transformer
pins come out
of the secondary
(high voltage/resistance side)
and go to light up the tubes
01 and V1...06 and V6
is the row where
the secondary side is in this
picture:
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=13909[/url]Re: Viewsonic VX900 Bad Inverter<br ... for backlight
Leave a comment:
-
Re: DLink Di-524 troubles
not good,
only low esr
types are sufficient,
as for the defective
wall power adapter
that boiled
these stone caps,
replace it too,
if you want
long turn
solution
Leave a comment:
-
Re: Soldering Station upgrade, what to look for?
they last long without
the required tinning,
but its a good
practice to
tin the tip
after
each use
and the jbc
station is
very sturdy and comfortable...
Leave a comment:
-
Re: ACER AL2423W - no display
replace the others too (all of them)
Leave a comment:
-
Re: lg w1924s start button blibking for 15 minutes
all of them,
except the big one
on the primary side,
use good caps
for replacement
Leave a comment:
-
Re: RockFord Fosgate P300-1
it helps to transfer the heat(thermal compound)
better take the
amp to someone,
who deals
with those
issues daily
(amp repair guy)
Leave a comment:
-
Re: About power supply troubleshoot technic
[url]http://www.powersupplyrepairguide.com/[/url]Re: About power supply troubleshoot ...ide.com/[/url]
Leave a comment:
No activity results to display
Show More
Leave a comment: