Re: Samsung hlr4667wax/xaa dmd board?
That Im not sure of RJ; but it is new out of the box. All i know is the part number is bp96-00674a. And i was assured from the guy i bought it from that it is the right one for my tv.
matts6887
Member
Last Activity: 05-13-2014, 11:06 AM
Joined: 04-26-2014
Location: Scottsdale, AZ USA
-
Re: Samsung hlr4667wax/xaa dmd board?
Also; one other thing; The pic of the heat sink setup and dmd fan has those white like "lines" on the dmd board cover. My original dmd board cover does not have those white lines; so this must be for a different model samsung dlp; unless that is a reflection in the pic of something else; but I dont believe it is. Plus I do not see any rectangular holes on mine like in the pic; so with that in mind; where do i find the jumper for my model dlp tv? the model number again is hlr4667wax/xaa and again its samsung. its a 46" dlp.Leave a comment:
-
Re: Samsung hlr4667wax/xaa dmd board?
I don't have the old color wheel anymore. It's been disposed of. And I already have the new one in place. If I could post a pic of the current dmd board I would but there is no way to attach files to these posts I don't believe.Last edited by matts6887; 05-08-2014, 08:41 PM.Leave a comment:
-
Re: Samsung hlr4667wax/xaa dmd board?
Well I also just noticed that the dmd board setup in the pic where it shows the jumper is different than what I have. My original dmd board does not have any rectangular holes next to the dmd heatsink. So this pic is showing the wrong setup. My exact model number is hlr4667wax/xaa. That one in the pic on that page is not my model. Please advise where to go from here as I can not find whether or not this one has a jumper. I looked at the dmd
Board but did not see any jumper that looked like it could be removed.Leave a comment:
-
Re: Samsung hlr4667wax/xaa dmd board?
No; the old color wheel broke; which is why I had to replace it; but when it was replaced; I did not switch the jumper because I didnt know that you may have to switch it; but now that i do know im gonna go take a look at the component tray with the optics on it and see whats up.Leave a comment:
-
Re: Samsung hlr4667wax/xaa dmd board?
I dont think you need to change any jumper on this tv unless im mistaken. I put everything back together after putting the new color wheel in and still I got no color wheel spinning, no buzzing from the ballast; and no lamp lighting up. This sort of leads me to believe it is possibly the dmd board that is bad. So; with that in mind; I bought a used but in fully working order dmd board for my model dlp tv. I just hope i did not waste my money on doing this when it could be just the jumper that is the problem. The thing is; where is the jumper...Last edited by matts6887; 05-08-2014, 03:42 PM.Leave a comment:
-
Re: Samsung hlr4667wax/xaa
another thing is; I am thinking it could be the dmd board; as Im pretty sure i tried putting the ribbon cable for the color wheel in both ways; reconnected all the cables etc; and tried to power it up and still got no lamp; and i hear no spinning of the color wheel; no buzzing from the ballast; and i am getting no lamp. Thats why I sorta think even though I see a green light on the dmd board when it has power to it; that the dmd board is partially bad. The only thing i hear when i power it up; is a click from the tuner/component input board where the cable(s)...Last edited by matts6887; 05-02-2014, 10:39 AM.Leave a comment:
-
Re: Samsung hlr4667wax/xaa
chassis is l3 Im pretty positive. the part number is bp96-00674a. The ballast is on a slight angle. And yes I put the ribbon cable in the correct way; facing towards the back of the tray; towards me with the glass lens facing toward me. Thats the way the it was put in. And i am positive the one i received is the correct one.Last edited by matts6887; 05-02-2014, 10:37 AM.Leave a comment:
-
Re: Samsung hlr4667wax/xaa dmd board?
Can anyone out there help me on this one?......anyone?Leave a comment:
-
Samsung hlr4667wax/xaa dmd board?
I just recently replaced the color wheel in this tv. The lamp, color wheel, and ballast were working fine before the color wheel broke. Now; whenever i have everything connected properly and in the right places; I dont hear any spinning of the color wheel; no buzzing from the ballast; and get no lamp. Because if im not mistaken; in order for the lamp to light; first; the color wheel has to spin up; then the ballast has to fire; then the lamp is suppose to fire. And i know its not my lamp as i took it to a place and had it tested and it lit up just fine. I looked at the lamp also to make sure its... -
Re: Samsung hlr4667wax/xaa
anyone......anyone?Leave a comment:
-
Re: Samsung hlr4667wax/xaa
Can anyone out there comment on this? where do i find the jumper for the color wheel?Leave a comment:
-
Re: Samsung hlr4667wax/xaa
where do i find the jumper for the wheel? I already have the optics tray taken out of the tv. yes i am positive it is the correct wheel for my model tv. mine I believe is the l3 chassis. I made sure it was the correct one before i bought it. As for the color wheel spinning; i cant hear any spinning of the wheel or buzzing from the ballast; so where do i head from here.Last edited by matts6887; 04-26-2014, 08:33 PM.Leave a comment:
-
Samsung hlr4667wax/xaa
I am having a issue with my samsung dlp tv. About 2 months ago; one evening; the color wheel suddenly broke; and the lamp was working before the color wheel broke; So; i ordered a replacement off ebay; put the new one in once i received it; reconnected all the wires and cables to the proper places; and turned the tv back on; only to find out the lamp was not lighting. I doubt its the lamp; as i took the lamp to a repair place and had it tested and it lit up just fine so i know its not the lamp. That leaves me with the dmd board and the ballast. how can i test both the ballast and the dmd board... -
Samsung hlr4667wax/xaa
duplicate thread. Please deleteLast edited by matts6887; 04-26-2014, 05:19 PM. -
Re: New Members - please post your introductions here
Hello out there. Matt from Scottsdale, Arizona here. Just trying to find out how i can possibly save my 46" samsung rear projection dlp tv.Leave a comment:
No activity results to display
Leave a comment: