Re: No power on Vizio voj320f1a 32" led tv
Ok so, I checked the power board while it was plugged in.. I was getting 5 volts on the 5 volt leads but nothing on the 12 volt leads... Then I went back to check the 5 volts again and found nothing??? I contacted the ebayer who sold it to me and he offered an exchange ... hope the power board is once again bad that way an actually good working one will fix this set.... I'll ask more questions if the replacement board doesn't work....
mrcrazynutz
New Member
Last Activity: 05-05-2015, 10:42 AM
Joined: 04-22-2014
Location: Texas
-
Re: No power on Vizio voj320f1a 32" led tv
There are no fuses on the top of the board... didn't check underneath but I doubt this one has a fuse on the main board......Leave a comment:
-
Re: No power on Vizio voj320f1a 32" led tv
bump... anybody wanna help me out here?
I know i'm a novice but pictures and/or instructions would help out a lot...
thanksLeave a comment:
-
Re: No power on Vizio voj320f1a 32" led tv
Ok here is the power board...
I do have a multimeter but my probes are to big to get into wire and connector.
I think I can stick a small gauge wire into the end of the wire connector to
check voltages but which wires should I check?? maybe by color?? red and black??
Thanks for all the help......Leave a comment:
-
Re: No power on Vizio voj320f1a 32" led tv
Ok I checked what I thought was the right parts... I think...
Anyways, I believe the new power board is good because the original
one has a burn mark on the underside... So, what other board would
cause the tv to not have any power on or in standby... I mean no white
or orange power led??Leave a comment:
-
Re: No power on Vizio voj320f1a 32" led tv
ok I know there is a way of doing this and someone has it written out somewhere...
Question is where are those instructions??
Thanks..Leave a comment:
-
No power on Vizio voj320f1a 32" led tv
So, I've been trolling around and gain a lot of information but I have an issue on a vizio tv that is a voj320f1a. It had absolutely no power so I went on ebay
and found a new power board with a warranty. Replaced the power board and still no power??? Any ideas? Maybe the original power board wasn't the issue Should I return it for a refund??
Thanks for any advice in advance...
C -
Re: LG 50PG20 Plasma "weird display only with inputs"
Did anybody ever figure this issue out?? I am having the same issue on my lg 50pg20...
Don't want to have to start a new thread if the problem is already described on this thread!
My TV works great for the first 15-30 mins. but then looses the brightness and gets a pink/bluish pixelated look afterwards. Have to unplug it for a few days before it starts working well again and then looses the picture once again... what should I check first?
Try first? Could this be a power board issue?
...Leave a comment:
-
Re: New Members - please post your introductions here
Hello everyone... Just looking for advice on lcd and plasma tv repairs... repairing my old tvs and other computers for myself and my friends. Thanks for all the future advice..Leave a comment:
No activity results to display
Leave a comment: