Re: Line filter\choke - gluing broken ferrite core?
[url]http://edn.com/electronics-blogs/living-analog/4375485/Gluing-Ferrite-Cores-[/url]
[url]http://jimlaurwilliams.org/wordpress/?p=3337[/url]Re: Line filter\choke - gluing broke.../?p=3337[/url]Re: Line filter\choke - gluing broken ferrite core?
[url]http://edn.com/electronics-blogs/living-analog/4375485/Gluing-Ferrite-Cores-[/url]...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Battery question
SORRY - You're not just insane! :-)
Who else is so perfectionist analyze the battery voltage?
This is unprecedented! -----Perfekné!
I can not believe that someone so much invested in this scenario,
In any case, I admire Enerjiji that you invest in this all,,,
I enjoy it, as there are such exibiconisti,
:-)
Leave a comment:
-
Re: Battery question
Good luck to you there!,
If you get stuck or something does not go right, pick up,
I heard all their knowledge and be able to activate to help you,
....everyone Welcome ! :-)
Leave a comment:
-
Re: Battery question
Two 12v 200Ah ACU in series, to be charged with a 10% is
20 Amps for a period of 15h (to be 100% full).
+5h is "throwing" energy conversion power in Chemistry.(utilization factor)
If you are charged only with 10Amp, then time should be extended to 30h
to be charged to 100%.
Of course all this is true if the batteries were fully discharged.
Best Regards,Last edited by Trick Fix; 04-18-2014, 04:35 AM.
Leave a comment:
-
Re: Battery question
As I understand it, you have the something like this schematic:...Last edited by Trick Fix; 04-18-2014, 04:22 AM.
Leave a comment:
-
Re: Battery question
@joshnz,Please,Slowly,
two 12V 200Ah Sla battery's in series is 24V 200Ah,--is Corect?
Ideal charge is 10% of capacity.
This means 20Amp --- 10% of maximum capacity.
Maximum Voltage during charging does not exceed
(for two 12V batteries connected in series) _______________max 28 V.
to charge will any practical good.
Beware the charging current to the batteries lasted longer,
Greetings,
Leave a comment:
-
Re: UPS battery question
If the UPS is connected to the battery 3 times greater then there is a risk of overheating the charging circuit.
Observe the temperature of the elements to charge the battery because the
charger in the UPS is sized for normal charging current.
Larger batteries require a higher charging current,
and it may be burned in a part of the elements of the UPS.
Leave a comment:
-
Re: Line filter\choke - gluing broken ferrite core?
I know the Araldite,-good, but it's a little thick for this application,
I still think you should have to use some super glue that is very liquid,
and with it that part of the paste in which it separated.
I said earlier that it is important to glue it to the thin layer to the input Filter performance remained the same.
>I apologize if something bad interpreter<
Not in bad faith,
Leave a comment:
-
Re: Line filter\choke - gluing broken ferrite core?
Good day to all,
This is my first answer.
I think the broken core can stick with and glue in a thin layer.
I believe that it will work OK,
it had already tried and works well.
It is important that the adhesive layer as thin as possible.
greeting...
Leave a comment:
No activity results to display
Show More
Leave a comment: