tvtek
New Member
Last Activity: 01-11-2018, 01:26 PM
Joined: 04-09-2014
Location: warwick,ri
-
VIZIO M502i no start
Anyone have a fix for this one. There is 3.3v for "power on" Cannot change that -
Re: PN59D6500 shuts off in 5-15 minutes; HELP!
I am presently working on that model. I ordered a T-conn because when I jumpered the two top connectors i didn't get the colors changing pattern. -
Re: Vizio XVT473SV Power On problem
i HAVE ONE WITH NO +18V. NO +12V, ONLY HAS +5V ON PS. Help please. JohnLeave a comment:
-
Re: Samsung LN55c650l1fxza screen full of vertical lines
I've fixed one of these real easy. If you can restore normal picture by lightly pressing the LVDS cable to the Main board side. You can bake the main module...Yes, actually BAKE it @ 300 for 8 minutes. this will cause a reflow. Important; Do not touch the board until it cools to near room temperature with oven door open. If you touch the board while the solder is still soft, you will ruin the board. JohnLeave a comment:
No activity results to display
Leave a comment: