Re: ONKYO TXNR609 no sound unless you heat up
thanks for the help guys
un4givintoo
Member
Last Activity: 12-12-2020, 10:15 AM
Joined: 04-02-2014
Location: alabama
-
ONKYO TXNR609 no sound unless you heat up
I have an ONKYO TXNR609 that has no sound unless you heat up the boards with a hair dryer, any ideas where to start on this one? -
Re: voltage reading on heat sinks
no ill check that outLeave a comment:
-
Re: voltage reading on heat sinks
thanks guys
Leave a comment:
-
Re: voltage reading on heat sinks
ive got continuity between my heat sink and one of my transistor legs, forgive my newbyness
Leave a comment:
-
voltage reading on heat sinks
may be a dumb question, but am supposed to have any voltage on my heat sinks or could that be a bad transistor? -
Re: dynex dx46l150a11 stand by power only
bon .012
pwm .003
gnd 0
gnd 0
12v 0
12v 0
gnd 0
gnd 0
32v 0
5v1 0
gnd 0
5v1 0
gnd 0
pon 0
24v 0
24v 0
gnd 0
gnd 0
gnd 0
not sure what happened im not even getting th 5.1 volt standby power anymore fuse is goodLeave a comment:
-
Re: dynex dx46l150a11 stand by power only
ok fooling around with it some the backlight was flickering some while I was plugging the ribbon in that goes to the main board....... thinking maybe cold solder ?????????Leave a comment:
-
Re: dynex dx46l150a11 stand by power only
it looks like im getting nothing but on the bottom 5v1 pin im getting 5.1 thats on the top ribbon on the rightLeave a comment:
-
Re: Samsung PN50550T Won't Turn On!
take the back off and check the tops of the caps first if they are bulged or leaking out solder old ones out and new ones in i picked up a lg 42 at a local thrift store a few weeks ago and fixed itnow im hooked.Leave a comment:
-
Re: dynex dx46l150a11 stand by power only
few more...Leave a comment:
-
Re: dynex dx46l150a11 stand by power only
pics...Leave a comment:
-
dynex dx46l150a11 stand by power only
let me start by saying hello im jeff and im near birmingham alabama and im a complete noob at this whole tv repair thing. To make a long story short i got a hold of a lg 42" plasma at a local thift store a few weeks ago that ended up needing caps, i had it fixed in an hr and had less than 30 bucks in it. Well needless to say now im hooked and i dont really know crap but i have a decent multimeter and a soldering gun and im willing to listen and learn what i have now is a dynex 46 that does nothing but flash the stand by led there is no reaction when i hit the power button sound or visual...
-
Re: New Members - please post your introductions here
hello everyone jeff from alabama, i look forword to interacting with everyone
Leave a comment:
No activity results to display
Leave a comment: