Re: CD3217B12 compatibility
My problem is the compatibility of CD3217B12 if it was able to put back the original the problem is solved but the original is defective.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: CD3217B12 compatibility
Hello, I have the same issue. I have a board 820-01700 with CD3217B12 I order a new one and now the board is only working with battery and the Type C charger (original) is stuck at 5v ~ 0.25Amps and when the machine boots with battery is swapping to 20v 0amps.
I also replace the cd3217b12 from a donor board and I have the same issue.
Anyone knows if with DFU restore will fix the problem and somehow re-register the cd3217 to ROMs or T2 chip.
Is very annoying that you can't fix this board with a NEW part !
Leave a comment:
-
Re: Lenovo G50-30 no display
Do you find any solution? I have the same problem, i reflash the bios but nothing. I think it is probably bad processor.
Leave a comment:
-
Re: Question -- Vcore Voltage
I have a motherboard with the same problem
Leave a comment:
-
-
Re: SONY SVF15 DA0HK9MB6D0 rev...turns on for 10 seconds then off no video
Try this !...
Leave a comment:
-
Cq58-299ev bios need
I have a CQ58-299ev with motherboard type NEWTO_CR & HR_HPC MV_MB_V1
When power ups cannot posts and the caps blinks 2 times, every time i see this i have fix it with bios flash.
Does anyone have bios dump file that works with this motherboard.
-
Re: Toshiba c855-2gc flashing power light
This is the bin files, you must remove it and flash it with programer.
The one chip is placed near the intel chipset and the other near the kbc controller....
Leave a comment:
-
Re: Toshiba c855-2gc flashing power light
Try to reprogram the bios and ec...
Leave a comment:
-
Re: dell 17r 7720 bios
[ATTACH]106556[/ATTACH]
After hours... of searching...Re: dell 17r 7720 bios
[ATTACH]106556[/ATTACH]
After hours... of searching......Last edited by thodoris10; 02-25-2015, 07:09 AM.
Leave a comment:
-
Re: GeForce 9800GTX+ video problem
Did you try reflow the memory chips? and if the problem remains, the solution is re-balling he gpu.
Leave a comment:
No activity results to display
Show More
Leave a comment: