Re: SAMSUNG LED UN325000 PG - vertical lines
I still wasn't able to solve my TV issue. I've made a video taking measurements. If anyone can help me, I'll appreciate it very much.
Here's the link:
[url]https://www.youtube.com/watch?v=8rTpLSjcIqQ&feature=youtu.be[/url]Re: SAMSUNG LED UN325000 PG - vertic...=youtu.be[/url
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Today, I've gotten some free time, and was able to assess my TV situation.
I removed the power supply and measured the electric tension in several places - A5V, B13V, B5V etc. - , and the tension was oscillating between 0 and the expected value for that specific spot. For instance, the A5V kept reading 0 to 5, then back to 0. I noticed the maximum voltage for the LED bar wouldn't be any higher than around 90,0V. The power supply's model is BN44_00460A.
Could anyone possibly help me?
Thank you!
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Hey, guys! I'm back with updates on my t.v. status. It was functioning perfectly up until last week, when the screen turned black and the image faded to nothing. I noticed that when I turned the T.V. on, the SAMSUNG logo doesn't appear anymore, there are green vertical lines, and the sound is still working.The LED lights are also working properly.
That being said, I managed to buy a new T-CON board and replace the old one with it, but nothing changed. Could the issue be with the power supply unit or the main board?
Thanks...
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
I tried all procedures you suggested, tom66, but the lines only appeared again. They disappeared when I put the tape back on.
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
I searched online and found a youtube video (check the link below). I decided to give it a shot. First, I disconnected a flat cable, cut a piece of electrical tape and put it in different positions in the flat cable, 'til the issue was gone. I only had to re-do the process in the other flat cable, and it was done.
I'd like to know what happened. Does anyone have a clue why it worked? Does this prove it was a T-Con Board issue?
I'm attaching a few images of the procedure and the end result. The video link also follows: [url]https://www.youtube.com/watch?v=WNgESNOtCoY[/url]...
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Hello, tom66!
I just hope it's a fixable issue. That's a picture of my T-Con board. Thanks for the attention!...
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Thanks, mmartell. Yes, it's the same in all inputs. I'd just like to be sure it's not a screen issue, because in Brazil it's cheaper to just buy a new TV.
The Model Code is: UN32D5000PGXZD. The version is: KS24.
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Does anyone have another idea that might help me?
Leave a comment:
-
Re: SAMSUNG LED UN325000 PG - vertical lines
Hello, martino. Thanks for your help. I tried following the steps on the video you sent me, but, unfortunately, it didn't work.
I'll wait and see if anyone can give me another idea, 'cause I don't think I'll manage to solve this one on my own.
Leave a comment:
-
SAMSUNG LED UN325000 PG - vertical lines
My television started presenting lines like shown in the pictures below. The lines move, changing places according to the images on screen, and, sometimes, they disappear completely. Would, perhaps, it be a T-Con issue?
I appreciate the help....
No activity results to display
Show More
Leave a comment: