Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
No worries, I presume it was the right cap after all and it's not under stress? As I said I'll keep an eye on it, switch it off after use etc
Gbucks7
Member
Last Activity: 04-13-2014, 01:39 PM
Joined: 03-21-2014
Location: Cork
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
So I soldered the new cap in, connected everything back up and the tv powered up as normal. Happy days, I'll monitor it for a bit just for peace of mind. Cheers ladsLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
So do i, I presume it'll just pop again if it isLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
I bought a new cap from ebay, havent installed it yet but ive attached pics of the specs. It is however a bit smaller and thinner.
I'm wondering now what risks will come into play if it is the wrong cap. I've searched the net but cant find any info on my board so it'll have to be trial and error...Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
CheersLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Hey Ashroyer, thanks for the post. I'm trying to find out the values of the component blown so I can order and replace it. It was damaged so the values are illegible. I have a 42pfl so I'm unsure as to whether your board and mine are similar. The location of the cap is c502Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Thanks lads, i dont think there is a corner of the net i havent searched, the cap isnt used anywhere else on the board. They sell the boards on ebay and ive even emailed the seller and asked what the values are! I doubt he'll reply!
I obviously dont want any fire hazards from incorrect components so its a waiting game i supposeLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
hmmm so 100pf with a tolerence of 10%. Until im fully sure the research shall continue..Last edited by Gbucks7; 03-27-2014, 02:11 PM.Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
As in 102k or 103k? when the specs are discovered is it a matter of just replacing it, or is the cap a symptom of something else? The floor is open to all philips tv owners!Leave a comment:
-
Philips PSU problem
Hey Madcappers, Greg here, having an issue with my TV and told this was the place to come so here goes...
Item: Philips 42"LCD TV- 3 years old
Model: 42PFL5405H/05
PSU: LG
Power supply: 230v {Ireland}
Problem:
Tv was on standby, pressed the power button on the remote- loud bang, some smoke and a few sparks. Then nothing- no life in the tv. The 3a fuse in the plug also blew. My PS4, SKY box and router that were plugged into the same adapter block were all unaffected.
I removed the back cover and the PSU {im an electrician... -
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
This is the blown cap cleaned up by the way...Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Would it make a difference it being an LG power supply board perhaps?Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
I've seen that manual but couldnt make any sense of it to be honest. I presume you couldn't find anything in it also?Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
yes the resistor, sorryLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
0.7 ohmsLeave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Ive attached a few pics of the underside, MOSFET looks fine, no signs of any shorting...Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Great cheers, I take it the MOSFET is the three black components in the pic of the blown cap? Is it just a continuity test yes?Leave a comment:
-
Re: Cap exploded...help required. Philips LCD 42PFL5404H/05
Hey budm
Thanks for the speedy reply, i've attached a pic of the specs that i think you require...Leave a comment:
-
Cap exploded...help required. Philips LCD 42PFL5404H/05
Hey Madcappers, Greg here, having an issue with my TV and told this was the place to come so here goes...
Item: Philips 42"LCD TV- 3 years old
Model: 42PFL5405H/05
PSU: LG
Power supply: 230v {Ireland}
Problem:
Tv was on standby, pressed the power button on the remote- loud bang, some smoke and a few sparks. Then nothing- no life in the tv. The 3a fuse in the plug also blew. My PS4, SKY box and router that were plugged into the same adapter block were all unaffected.
I removed the back cover and the PSU {im an electrician... -
Philips Tv PSU Cap exploded!! Help!
Hey Madcappers, Greg here, having an issue with my TV and told this was the place to come so here goes...
Item: Philips 42"LCD TV- 3 years old
Model: 42PFL5405H/05
PSU: LG
Power supply: 230v {Ireland}
Problem:
Tv was on standby, pressed the power button on the remote- loud bang, some smoke and a few sparks. Then nothing- no life in the tv. The 3a fuse in the plug also blew. My PS4, SKY box and router that were plugged into the same adapter block were all unaffected.
I removed the back cover and the PSU {im an electrician...
No activity results to display
Leave a comment: