Re: LG 50pcdr1 is broke
Can I use 670990020d
nimust
Member
Last Activity: 05-08-2014, 08:40 AM
Joined: 03-15-2014
Location: houston tx
-
-
Re: LG 50pcdr1 is broke
Now I have new issue I am trying to locate a new replacement Ps board and cannot locate one, can I use a different numbered board like 6709900020a?Leave a comment:
-
Re: LG 50pcdr1 is broke
Board number is 6709900020b.Leave a comment:
-
Re: LG 50pcdr1 is broke
I have it at home as soon as I can I will post itLeave a comment:
-
Re: LG 50pcdr1 is broke
with mine no matter which boards I plug in or unplug I get the same click on the two seconds later the second click. Having ordered two power boards and both have not had the proper voltage output. At one point I thought the y sus and buffers were blown and ordered new and that did not work, so now I need to locate a reputable power board and see if that works.Leave a comment:
-
Re: LG 50pcdr1 is broke
What I am trying to find out is located in the picture I posted above, if only two of the caps were bad what else could been blown.Leave a comment:
-
Re: LG 50pcdr1 is broke
Thanks for the response, I have checked the output voltages and have found readings that vary, I have disconnected the y, the z boards the readings still vary from 50 colts to 134 volts for p805.Leave a comment:
-
Re: LG 50pcdr1 is broke
This is a picture of the old Ps board that had the bad caps I replaced them and this did not work, then I ordered a board from eBay and I still have the same click of death.[ATTACH]83759[/ATTACH]...Leave a comment:
-
Re: LG 50pcdr1 is broke
Anyone know how to check the power board?Leave a comment:
-
Re: LG 50pcdr1 is broke
I'm thinking this supposed new PS is bad.Leave a comment:
-
Re: LG 50pcdr1 is broke
ThanksLeave a comment:
-
Re: LG 50PC1DR doesn't power up. Just clicks.
Alright I have replaced the y sus, the top and bottom y buffers and the power board and I still have the same issue. TV clicks and will not start, I would like to know what voltages should the pins be reading for p 805. I am wondering if the power board I have recently acquired is bad.Leave a comment:
-
Re: LG 50pcdr1 is broke
I have researched and read everything I have been able too and to no avail.Leave a comment:
-
Re: LG 50pcdr1 is broke
Mine is a 50" and the z sues piggy backs from the y sus. Do you mean unplug the z sus and see if there is a change? If that is the case I have already tried disconnecting the z sus with the same results. Did your fan come on before you changed any of the boards?Leave a comment:
-
LG 50pcdr1 is broke
ok, I am not a TV repair person, but my LG screen went black with no popping sound, the audio kept working for about two minutes then it stopped and then nothing. Thought is blew the caps I took the back off and sure enough two caps on the power board were popped. Changed them out and still nothing, set clicks then powers back off, then I said the heck with it and ordered a new board, waited a week installed it and nothing changed, decided what the heck and ordered a new y sus board and y buffer boards just installed them and still the set clicks and goes into standby. I need help, I do not know... -
Re: New Members - please post your introductions here
got broke TVLeave a comment:
-
Re: LG 50PC1DR doesn't power up. Just clicks.
I am having 4he same issue as above will try to post a new thread when I have the time.Leave a comment:
No activity results to display
Leave a comment: