Re: Pioneer PDP-435PU, no picture after 10 seconds

I have the service manual from internet.

When i turn on the tv the green led at the front is on

And the red en green led at the media unit ar both constantly on.

When the tv turns off the red led at the front is on (constantly)

And the red led at the media unit is on. (constantly)

I don't have a media reciever i'm using a ps3

Re: Pioneer PDP-435PU, no picture after 10 seconds

The Green and the Red led burns

Re: Pioneer PDP-435PU, no picture after 10 seconds

I have no remote control.

I only see a black screen light up for 10 seconds.

And in the upper left corner a text what i can't read.

There must be 215 volt on the x and y-drive.

The 215 volt allows 10 seconds on the x and y-drive.

but falls very quickly back to 8 volts.

[url]http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERlh58w0x3/2012-07-14_203543_img_0793.jpg[/url]Re: Pioneer PDP-435PU, no picture af...<br /> I have

Re: Pioneer PDP-435PU, no picture after 10 seconds

can everyone read this text or is it a bad translation

Hello I have the following problem. When I make the room dark and I see something I lit him with a big black blur in the middle turn on the TV and text that can not be read at the top left corner. This he hold a full 10sec and then falls back to black screen.

Voltage on the power supply is good. There should be 215 volts to go from the power board? Drive to the x-and y-drive This comes on the second count, but then falls back to 10volt very quickly.

The capacitors look good on the eye. I did not know much about TVs and measuring components but would like to learn...

Re: New Members - please post your introductions here

Hello everyone