Many Thanks for the Link Alastair, I have contacted them to confirm compatibility of the board as I want to make sure 100% this time that I get a good one
...
Fred53
Member
Last Activity: 06-14-2014, 06:27 AM
Joined: 03-10-2014
Location: Doncaster
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
Many Thanks for the Link Alastair, I have contacted them to confirm compatibility of the board as I want to make sure 100% this time that I get a good one...
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
Please let me know where Thanks...
Leave a comment:
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
When you click on the thumbnails, navigate to the picture you want to look at then click on the picture it should open a Full Screen 5 Mb clarity picture.
The IC details are obliterated, whether this is due to cleaning of the residue from the failure or over temp during the failure of the PSU I am not sure....Leave a comment:
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
The back of the board has an IC Blown apart on the original and if you look at the replacement enlarged one of the jumpers appears to be blown also.
Thanks anyway though...
Leave a comment:
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
I have just fitted it and it is Dead
...
Leave a comment:
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
Thanks for that Budm
I just purchased the board as a replacement for a blown one, but as soon as I saw it, it looked bad to me.
I am not good enough to repair boards just replace but this was so glaringly wrong :/...Leave a comment:
-
Re: Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
Location R974 is painted, blown and fitted backwards it appears to me, but this is not a test, I am just wondering how someone could supply this board as tested working? and hope to get away with it
...
Leave a comment:
-
Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197 Opinion Needed
Hi All on Badcaps,
After Many Weeks of searching I finally found a PSU for My Toshiba 32BV702B
Toshiba 32BV702B - PSU - 17PW25-4 - V1 - 250111 - 23023197
100% Match, Delivered next day, (Not eBay I must add)
Purchased from an on line used TV parts seller, with a good rating.
Imagine my dismay!!! when I unpacked the PSU expecting to get my TV back up and working and found this before I even thought about fitting it.
1st pic Mine Top, 2nd pic Replacement Top , 3rd Pic Mine underneath, 4th pic Replacement Underneath....Last edited by Fred53; 06-12-2014, 12:33 PM. -
Re: VESTEL 17PW25-4 250111 V1 PSU - Project
THIS MIGHT BE THE ONE YOU NEED
[url]http://www.ebay.co.uk/itm/17PW25-4-250111-V1-23012666-VESTEL-POWER-SUPPLY-/281335040975?pt=UK_Sound_Vision_TV_Boards_Parts&hash=item4180e00bcf[/url]Re: VESTEL 17PW25-4 250111 V1 PSU - ...80e00bcf[/url]Leave a comment:
-
Re: Sharp Aquos LC-60LE745U Two Long Two Short
Woof woof!!! RoflmfaoLeave a comment:
-
Re: Toshiba LED TV, blank screen
When my Toshiba 32BV702B went Blank screen (2 seconds to blank) back in November, I contacted Toshiba Support (Number on Website) and they talked me through the factory default reset using the remote, which worked fine.
Only downside is I think the fault was still lurking in the background as the PSU blew 2 months laterLeave a comment:
-
Re: Pioneer PDP-435PU, no picture after 10 seconds
Found this on a dutch site [url]http://www.sat4all.com/forums/[/url] same user name
link typo correct URL for picture.
[url]http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERlh58w0x3/2012-07-14_203543_img_0793.jpg[/url]Re: Pioneer PDP-435PU, no picture af...STOMERlh58w0x3Last edited by Fred53; 03-15-2014, 11:11 AM.Leave a comment:
-
Re: Where to find TVs to fix?
You could try to find the Trash / Recycling collection routes / time table for your local area and take a quick drive around the evening or early morning before they collect?...Last edited by Fred53; 03-15-2014, 04:36 AM.Leave a comment:
-
Re: Technika X22/14B-GB-TCD-UK LCD screen went dark
I haven't stripped it down that far yet, sordids999, I had a look but the number must be under a board. the inverter was easy to get to 2 screws, I changed it like i said earlier, but same fault CCFL's on for a flash, when I get it stripped I will PM you the number ok, Thanks for the help.
I want to try this 11W test bulb idea from Budm first, cool idea...
Last edited by Fred53; 03-14-2014, 11:49 AM.Leave a comment:
-
Re: Technika X22/14B-GB-TCD-UK LCD screen went dark
Brilliant Thanks again budmLeave a comment:
-
Re: Technika X22/14B-GB-TCD-UK LCD screen went dark
Thanks for that Gem, budm, I will be testing soon
AARGH Just checked my spares and only got 8w 9w and 11w will I be able to use 11Watt? by any chance!...Last edited by Fred53; 03-14-2014, 10:26 AM.Leave a comment:
-
Re: Technika X22/14B-GB-TCD-UK LCD screen went dark
I haven't got a spare CCFL, is there any sort of ballast that I could use instead to test each socket on the invertor?...Leave a comment:
-
Re: VESTEL 17PW25-4 250111 V1 PSU - Project
Thanks for the info Tom, unfortunately my hands and eyes aren't as good as they used to be so I ballsed up the soldering LOL.
Found a New PSU for Toshiba 32BV702B on ebay (lots of good feedback for the same board) for £41 incl shipping, so I will have to go for that option
Leave a comment:
-
VESTEL 17PW25-4 250111 V1 PSU - Project
Hi All,
I have attached some pictures of this VESTEL 17PW25-4 250111 V1 PSU removed from a Toshiba 32BV702B.
TV worked fine from new (10 months old) it had a blank screen and red flashing light on start up, performed factory default reset as advised by Toshiba and all was ok for three months.... Now13 months old and Toshiba don't want to know.
TV was in PC mode VGA connected, when I shut it down / standby / no on off switch.
Next morning the set was totally dead, stripped it down and found the PSU Board is Fried, Blown apart IC (see Pictures).... -
Re: Technika X22/14B-GB-TCD-UK LCD screen went dark
Hi sordids999,
Thanks for that, I will look on ebay and see if I can find one as well.
I might find a working one cheap, I don't like to leave a job I started unfinished
Thanks Fred.Leave a comment:
No activity results to display
Leave a comment: