Re: Haier L32F1120 Green but no go
So any other thoughts on this one?
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Haier L32F1120 Green but no go
Would there be something I can try and jumper to get it to start????
Leave a comment:
-
Re: Haier L32F1120 Green but no go
Hard to find for these old eyes. It measures 1.08v on one side and 1.09 on the other....
Leave a comment:
-
Re: Haier L32F1120 Green but no go
Found U25 on the under side of the board. looking for R218 now.
Leave a comment:
-
Re: Haier L32F1120 Green but no go
I seen that but I meant where to tap in to on the board as I see no U25
Leave a comment:
-
Re: Haier L32F1120 Green but no go
Ok budm, this is a little over my head. I see page 29 but am not sure where I should check the voltage you want me to.
Leave a comment:
-
Re: Haier L32F1120 Green but no go
On J6 they show 6 pinouts but the board only has 5 so if you start from 1 VCC_STB has 5.24v and KEY_STB has nothing.
Leave a comment:
-
Re: Haier L32F1120 Green but no go
Bummer. All it gives for description is for the set not powering on by the remote or buttons.
Leave a comment:
-
Re: Haier L32F1120 Green but no go
You don't think that eeprom would work then?
Leave a comment:
-
Re: Haier L32F1120 Green but no go
I can not find anyone that has a board in stock but I seen this add for eeprom could that be anything?
[url]http://orders.ebay.in/ws/eBayISAPI.dll?ImportHubViewItem&itemid=271188523347[/url]Re: Haier L32F1120 Green but no go<b...88523347[/url]
Leave a comment:
-
-
Re: Haier L32F1120 Green but no go
I do not have a scope. guess just replace main board then?
Leave a comment:
-
Re: Haier L32F1120 Green but no go
Thanks for the manual, the readings are in the pic....
Leave a comment:
-
-
Re: Haier L32F1120 Green but no go
For some reason I can not download that manual. the pin marked ON/OFF i get 5.24v does not matter pressing button or not. I even disconnected it and same.
Leave a comment:
-
-
Re: Haier L32F1120 Green but no go
Yes, as soon as plugged in the light comes on and stays blue. And I double checked the voltages and all seem ok from the PSU.
Leave a comment:
-
-
Re: Haier L32F1120 Green but no go
Next to them on the board it says c251 and c119 and yes they go to inverter. No backlight while holding button in.
Leave a comment:
-
Re: Haier L32F1120 Green but no go
My mistake it's actually a blue light and turns on when I plug the set in and does nothing with power or any other buttons.
Leave a comment:
No activity results to display
Show More
Leave a comment: