Re: Phillips 42PFL6704D/F7 Issue

So far so good. I reinstalled the back and have run the set at least a few hours the last couple days with no issues. No idea what happened but I'll cross my fingers and hope it keeps working till I sell a house and can afford to replace it.

Re: Phillips 42PFL6704D/F7 Issue

Sorry. My girlfriend interrupted my priorities yesterday. Here is a pic of the back of the power board. Nothing obvious to this untrained eye. No luck getting it to have the issue with the back off to allow a cooling with air.

John...

Re: Phillips 42PFL6704D/F7 Issue

That makes a lot of sense. I've been running it with the back off for several hours now with no issue. I'll take the board off tomorrow and look it over closer and post pictures of the back. Thanks again.

Re: Phillips 42PFL6704D/F7 Issue

Works perfectly for 10-15 minutes maybe longer the first time after its been off for a few hours. I've attached a picture of the whole back but might need to lay it down again to get a better picture. I'm running it now and assuming reconnecting all the cables inside doesn't fix it (not at all hopeful) I've got a spot light standing by. None of the boards show any burns or discoloration beyond the normal where they soldered it.

Thanks so much for helping out.

John...

Make: Phillips
Model: 42PFL6704D/F7
Issue: After a short time running the screen goes black but the sound continues to play. It doesn't appear to be the backlight as no screen image can be seen from any angle close up. If turned off for a while it will come back on with and repeat the same process. I've attached images of the two main board. I don't see anything straight away but I've never really done this so don't know exactly what to look for.

Thanks for any help or suggestions, I'm new to this, just want to get my TV back work. If I did anything wrong or need to...

Re: New Members - please post your introductions here

Maybe post a reply, not a quick-reply.

Re: New Members - please post your introductions here

Hmm still can't update my profile or post.

Re: New Members - please post your introductions here

Hello, just joined due to a couple issues but have lurked for a while.