Re: Viewsonic VA912
OK, It's fixed ! :-)
I replaced the transformer that I just got on eBay, and the monitor now works fine.
I had already replaced all of the E-Caps, as 3 of them were bulged on the top with yellow stuff coming out of them...
John Hopf
New Member
Last Activity: 12-05-2015, 02:28 PM
Joined: 02-25-2014
Location: Newport, RI
-
Re: Viewsonic VA912
OK, It's fixed ! :-)
I replaced the transformer that I just got on eBay, and the monitor now works fine.
I had already replaced all of the E-Caps, as 3 of them were bulged on the top with yellow stuff coming out of them...Leave a comment:
-
Re: Viewsonic VA912
Yes, that is the one I have. Thanks for the link !Leave a comment:
-
Re: Viewsonic VA912
This is it [url]http://www.ebay.com/itm/100-New-Inverter-Transformer-SPI-8TC00245-for-Viewsonic-XV922-High-Quality-/330833040491?pt=LH_DefaultDomain_0&hash=item4d072f946b[/url]Re: Viewsonic VA912<br /> <br /> T...072f946b[/url]Leave a comment:
-
Re: Viewsonic VA912
I see it here - [url]http://lcdparts.net/TransformerDetail3D.aspx?ProductID=2724[/url]
Mine measures 0.5 ohm primary and 999.0 ohms secondary on one side and 0.5 and OPEN on the other. So I guess it is bad. Where is a good place to get a new one? From that link?Re: Viewsonic VA912<br /> <br /> I...one? From thatLeave a comment:
-
Re: Viewsonic VA912
Mine is different. It only has one transformer.Leave a comment:
-
Re: Viewsonic VA912
I have a VA912b that is doing the 2 seconds on and off thing.
It did have a few bulging caps and I replaced all 7 of the E Caps there.
But it is still acting the same.
The two fuses are OK. I don't see any others on the 2 boards.
Any help? How can I check the 2 tiny voltage regulators?Leave a comment:
No activity results to display
Leave a comment: