Re: Samsung LE32C530F1W (LCD), front control dead and no start
Must be the eprom even at 5V standby while? In my eprom on the item number IC501, is missing 5V.
zeko
Member
Last Activity: 04-24-2020, 05:53 AM
Joined: 01-25-2014
Location: Pristina
-
Re: Samsung LE32C530F1W (LCD), front control dead and no start
aha, OK.
And here, what's interesting here?
I'm bad with english.
[url]http://forum.samygo.tv/viewforum.php?f=7[/url]Re: Samsung LE32C530F1W (LCD), front....php?f=7[/url]Leave a comment:
-
Re: Samsung LE32C530F1W (LCD), front control dead and no start
Thanks @tom66....
Are you sure it has the eprom error? In my mainboard is eprom to item number IC501.
In the service manual is a ATMLH004 2EB1 is installed and at my mainboard is a ATMH006 2EB1 in it.
Or do you mean a different flash and no eprom?
I have to write in the firmware in new eprom?
[url]http://elektrotanya.com/samsung_le32c530f1w_bn94-02616h_bn4_firmware.rar/download.html[/url]Re: Samsung LE32C530F1W (LCD), front...nks @tom66....Last edited by zeko; 03-24-2014, 06:01 PM.Leave a comment:
-
Re: Samsung LE32C530F1W (LCD), front control dead and no start
Hello, where are service manual for Main AV-Board BN94-02616H (BN41-01331B)?Leave a comment:
-
Samsung LE32C530F1W (LCD), front control dead and no start
Hello,
Samsung LE32C530F1W power supply is OK, the error is on the Main AV-Board BN94-02616H (BN41-01331B).
The A5V of power supply is OK ... all other voltage is missing. If I disconnect from the motherboard connector then inverter operates (the screen is bright).
Control panel is without function and LED is not lit, device no start and does not respond to the remote control .. is as dead.
The error is well known, only what is broken on the Main AV-Board?
See here:
[url]http://www.ebay.co.uk/itm/BN41-01331B-Samsung-main-board-repair-service-/161255242389?pt=UK_Sound_Vision_TV_Boards_Parts&hash=item258b8fba95[/url]... -
Philips 42PFL7403D/10, won't turn on, stby LED 2x blinks
Hi,
Philips 42PFL7403D/10, won't turn on, stby LED 2x blinks?
Chassis: Q529.1E LA
Help me... -
Re: LED-TV LG 42LE5500, HDMI no signal
software update has LG TV itself pulled over the network .... TV had before no errors. TV is for Europe and now has software version 04.00.00
How can I update it again back to software version 03.21.03 or 3.20.21????Leave a comment:
-
LED-TV LG 42LE5500, HDMI no signal
Hi, all HDMI 1 to 4 show no signal ... About tuner and scart everything is ok.
I suspect the software update is to blame for the LG no longer works via HDMI.
How can I make it back to the old software update??
Thanks. -
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
it was bad IC802 MP2A5077 ..... many thanks it runs again
Another question,
can Arctic Cooling MX-2 thermal compound for PC is also used in LCD TV power supply, or must be one special thermal paste for an LCD TV?Last edited by zeko; 02-04-2014, 02:00 PM.Leave a comment:
-
Philips LCD 37PFL8404,bad flat cable to panel
Hi, one line to foil does not contact.
How to fix it again???
Thanks.... -
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
M-Power 2A Block Diagram, page 9....Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
many thanks a lotLeave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
It means that firs comes 24V, 17V, 9V and then comes signal from A-Board for start PFC?
If so, then the A-Board good.Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
Yes the IC802 is bad. I only ask because of 5V on IC854.
Signal from A-board comes later .. only starts IC802 and secondary is 24V, 17V and 9V be there. Is that so?Last edited by zeko; 01-28-2014, 05:03 PM.Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
The power supply has the D854 not a 5V and this voltage comes from A-Board.
D854 near PC801 secondary side.
In addition to the IC802, is also A-Board with error???
Or if IC802 works then is also 5V on D854?Last edited by zeko; 01-28-2014, 04:56 PM.Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
there's 2 versions ?...Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
Mp2a5077 (c5hazzz00012)Last edited by zeko; 01-28-2014, 04:32 PM.Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
Ic802 = mp2a5077 (c5hazzz00012)Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
Can I unsolder the pin 10 of IC802 and check the voltage on C827
whether it is stable now... how high should the voltage?
When do I desolder pin 10 is thus not break anything?Leave a comment:
-
Re: Panasonic TX-32LX85F blink 3 times, P Board-power supply
capacitor C827 I replaced with a new.Leave a comment:
No activity results to display
Leave a comment: