Re: DVD player (JVC XV-F80) repair or replacement part needed
Thanks for the link. Looks like that will work.
Before I consider buying it though I want to be sure the problem is the pick-up lens. Could the problem be from any other source?...
ceramic
Member
Last Activity: 06-12-2009, 01:53 PM
Joined: 02-13-2009
Location:
-
DVD player (JVC XV-F80) repair or replacement part needed
I'm working on this DVD player (JVC XV-F80) that was not working due to a DVD inserted incorrectly. When I opened it up the DVD was completely shattered with pieces everywhere. I managed to clean it out and everything was working but it wasn't able to play DVDs very well; it will slow down and pause sometimes. As at now, the DVDs wont play at all - I get a "No Disc" error when I insert a DVD. I tried several known good DVDs, same result. It works perfectly with audio CDs.
My guess is the pick-up lens (part # LEA10024-01) is bad and need to be replaced. However I couldn't...Last edited by ceramic; 05-13-2009, 10:16 PM. -
Re: Replacing capacitors
finally got it working....no problems so far. hope it stays that way
Thanks for all your help!Leave a comment:
-
Re: Replacing capacitors
thanks for the tip and warning. yeah I have fried a few circuits by not considering the polarity. I've learnt that lesson now for good
....
Leave a comment:
-
Re: Replacing capacitors
I believe its the secondary side. Couldnt attach pic cos its too large but i'm sure i'm right so no need.
Thank you so much....Last edited by ceramic; 05-11-2009, 04:55 PM.Leave a comment:
-
Re: Replacing capacitors
What if you are working a power supply for a DVD player?
Also, is there a way of finding the ESR value without buying those expensive ESR meters....Leave a comment:
-
Replacing capacitors
When replacing a capacitor, does the capacitance have to be strictly the same? I know the voltage doesn't necessarily have to be the same but the new one has to be higher than the one you are replacing. So for instance, can you replace a 680uF 10V capacitor with an 820uF 25V capacitor (in case that's the only one you have handy and don't have time to order the same rating as the original). Thanks. -
Re: unfusing
Where can I get these fuse holders, the ones I've seen online are kinda huge. thanks a lot...Leave a comment:
-
Re: unfusing
well, these are actually work lcd monitors and we usually send them to a recycling company when they aren't working. but i took the initiative to fix those that i can from my little experience and electrical engineering background.
thanks for the info PlainBill. I tried soldering one of those SMT fuses, and it was a nightmare
it was virtually impossible for me to solder without overheating or damaging it somehow. maybe i wasn't using the right equipments...
Leave a comment:
-
Re: unfusing
thanks a lot guys. I've had to thrash a couple of lcd monitors because I couldn't find a replacement fuse. i was was tempted to just use a jumper but thought the fuse was there for a reason.Leave a comment:
-
unfusing
What are dangers or problems you will encounter if you replace a fuse in an inverter board with a simple wire. Just wondering
No activity results to display
Leave a comment: