Re: Problem with Emachines L22YCET Monitor

It is indeed the monitor frying the cpu and I am 100% certain of that as of now, since the original post, it has fried a second cpu. I give up on working on THIS monitor because of the lack of parts and lack of technical information (electrical schematics, electrical values, etc) that is available for these emachine monitors. I will know not to ever buy another and when one comes into my shop that is a real tough fix issue, I will give it a go but repairing is just not logical. I will explain to the customer my own experience and findings...

Re: Problem with Emachines L22YCET Monitor



Thanks for the input. I will copy my post to the "troubleshooting monitors" section as you have suggested, just learning my way around the forum and thanks for the suggestion.

Concerning the monitor:

I have sort of put the monitor problem on the "back burner" so to speak, I have been very busy however, it has been rolling around in my head that it could actually be that the video cable has shorted and intend to test it very soon.

I can post pics however, there...

Re: New Members - please post your introductions here

Hello, my name is Don.

I am an IT specialist with 4 years in the trade. I am very passionate about computers and love working with them. I have my own shop and have compiled archives on almost anything concerning computers, software, drivers, processors, motherboards and the like, I am now getting more into monitor repair and am only taking online courses for that but... hopefully, in time, I will have some expertise in that area as well.

If I can be of any help to any of you, please, contact me...

I have a emachines L22YCET monitor and it will power on and will stay on with no shutdown issues, when I hit the power button, the screen will show a quick pop up stating "No Sync" and then go blank.

The monitor actually fried a cpu on the motherboard in one of my desktop computers when I powered the monitor "on" but, I did not know that had happened at that point in time, so I connected the monitor to another desktop computer thinking that maybe the reason the monitor was not working or displaying anything was because of a graphics issue in the 1st computer...

Emachines L22YCET 22" LCD monitor

I am new to the forum so I hope I have doing this right..

I have a emachines L22YCET monitor and it will power on, the screen will show a quick pop up stating "No Sync" and then go blank. The monitor also fried a cpu in one of my desktop computers but I did not know that had happened at that point in time so I connected the monitor to another desktop computer thinking that maybe the reason the monitor was not working or displaying anything was because of a graphics issue in the 1st computer it was connected to so... I...

Re: New Members - please post your introductions here

I am new. I posted an introduction in another thread so I suppose I was in the wrong place. My name is Don and I do computer repair. Glad to be around folks that enjoy some of the same things as I do. Very best regards to each of you.

Re: New Members - please post your introductions here

Just want to thank you for letting me into your forum. Glad to be with good folks with some of the same interest as I have. It will take me a little while to figure out the posting guidelines I suppose and to post and keep on topic, but I will certainly do my very best to make sure to follow everything respectively. I am sure the Admin will help me out if I post in the wrong place. Very best regards to each of you. Don