Re: Best 22,33&47uf cap between 35-63v
Thank you guys for the help. It's greatly appreciated .
Epiclife
Member
Last Activity: 05-05-2014, 09:37 PM
Joined: 01-19-2014
Location: Lawrence, ma
-
Re: Best 22,33&47uf cap between 35-63v
Are you asking what will be powering the tattoo machine ?
And Tom66- so what would be similar to the Panasonic SU ?
Sorry for the dumb questions just know very little about capacitors .....Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Would the volts matter as well? I'll never go over 12v but do understand I don't want to be close to the 12v range. Don't want the cap exploding in my face in the middle of a tattooLeave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Similar as in high temp? Would the rubycon Rx and the Panasonic su be similar ?Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
I can use either one but the bipolar one would be better for when I start making more of them (custom coils and caps). Most people will just hook up the clip cord any witch way not knowing the positive and negative side to the machine. Witch in turn can fry the capLast edited by Epiclife; 01-19-2014, 01:06 PM.Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Cap also fine tunes the machine and creat less spark at the contact points.Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Frequency would vary between 140-175 Hz for lining 22uf or 33uf. 105-120 Hz for shanding/color 47ufLeave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Layers ,Ohms ,Turns ,MW Gauge ,Core OD
8 , 1.5 ,400 ,24 ,0.317 in
10 , 1.8 , 460 ,24 ,0.317 in
12 , 2.5 ,565 ,24 , 0.317 in
8 , 2.1 , 450 ,25 ,0.317 inLast edited by Epiclife; 01-19-2014, 12:16 PM.Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
The circuit created when you combine a capacitor with the magnetic coils is called a Resonant Tank Circuit. It essentially alternately stores energy in the field of the coils and between the plates of the capacitor. Thus it is creating AC from the DC current. The frequency at which the tank circuit runs is determined by the combination of the coils and the capacitor, change the value of either of them will change the operation frequency of the needle.Leave a comment:
-
Re: Best 22,33&47uf cap between 35-63v
Well if the cap gets hot that's a bad thing , means I'm working it to much . Would you happen to the the lifespan on it ? How many hours of operations ?Leave a comment:
-
Best 22,33&47uf cap between 35-63v
I am currently into building my own tattoo machines and right now working on the heart of the machine witch would be my coils and cap. I'm not to knowledged in this field of capacitors and was hoping if someone can help me out in choosing the best cap to work with for this type of application. Standard machines run a 22uf for lining ,33uf for lining/shader & 47uf for shading/coloring. Not that I will ever be going higher than 12v to run the machine , I figured there had to be a difference between a 22uf 35v compared to a 22uf 63v. Would it get hotter faster ?? Also since we work the machines... -
Re: New Members - please post your introductions here
Hi all !
My name is Amado. Currently in collage going for a bachelors in machanical engineering. And also a tattoo artist on free time. Not to into the electronics field but learning it's going to be apart of me since I've been bumping into it a lot lately. I'm quiet and shy and you may not here from me to much . I like to do a lot of reading and research before I try to dive into things so excuse me if I may come across as a dum dum at times but hey , we all started some were right? Hoping this intro was ok. Not really...Leave a comment:
No activity results to display
Leave a comment: