Re: Panasonic TCP-50G10 3 Blink error
How do I test it?? Thanks
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TCP-50G10 3 Blink error
I disonnected SC2 SS11 and P35, also the A board ribbons, when i powered it on i got no blink error codes. Thanks tw is there any other tests to verify bad SC board? Thanks for the tips but why no 5v at pin 6 on P board?
Leave a comment:
-
Panasonic TCP-50G10 3 Blink error
I am trying to figure out my issues on my 2009 model G10. The TV has been broken for some time now. I really liked this TV and would love to get it working again. I have replaced the A board which the manual says the the only cause of a 3 blink error is the A board. I am possibly thinking it could be the P board. When I test pin 5 and 6 on P25 I do not get close to 5V. If I am reading correctly from my research the 3 blink error is no 3.3V correct? So is there any other things I can check to make sure my P board is bad and is the culprit? Thanks for any help.
-
Re: Another Bad Panasonic Plasma
Thank you sir much appreciated. I will definitely check it out and post results.
Leave a comment:
-
Another Bad Panasonic Plasma
Hello,
I have been doing some searching on the forum and have not seen my problem covered.
TV is a Panasonic TC-P50G10 I get SOS3 error code. I have seen the technical report on the 3 blink error code being bad main A board. I replaced the A board and I still get the 3 blink SOS. I disconnected the SC board and the SOS goes to 6 blinks. I am lost if anyone could give some advice here I would appreciate it.
Is it possible I got a bad A board? Is there a way to test to see this is the problem? Thanks
I apologize I did not state the model number in...Last edited by Morts; 01-18-2014, 08:10 PM.
-
Re: New Members - please post your introductions here
Hello great place here I have been searching a lot
Leave a comment:
No activity results to display
Show More
Leave a comment: