Re: Hanns-G 19" turns off. PSU overheated and bad caps
The sticker on the back is mainly in chinese but there is the code AG172DP. However this is a model no. for a 17" not a 19" and this monitor is 19".
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Samsung 940MG
I got this Monitor/TV from a friend who was going to take it to the skip as it didn't work. The problem with the board was that the back lights had did work. When I took the monitor apart the PSU/inverter had two chips on it that had blown out and had cracked these where on the inverter side of the board. I don't know where to get replacment chips from, all the chips say on them is
P610
CD6S1E
and they have 8 pins. I have tested the backlights and they work fine. Does anyone know where I can get these chip from thanks?
-
Re: Hanns-G 19" turns off. PSU overheated and bad caps
Would these caps be good enough or should I get some better ones?
[url]http://cgi.ebay.co.uk/1000UF-25V-105-C-Low-impedance-electrolytic-caps-x-10_W0QQitemZ270279185121QQcmdZViewItemQQptZUK_BOI_Electrical_Components_Supplies_ET?hash=item270279185121&_trksid=p3286.c0.m14&_trkparms=72%3A1121%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318[/url]Re: Hanns-G 19" turns off. PSU overh...r /> [url]htt
Leave a comment:
-
Hanns-G 19" turns off. PSU overheated and bad caps
I have a Hanns G 19" inch monitor i bought it second hand form a car boot. When I got the monitor home I plugged it in and the monitor worked for about 5 mins. Then it went blank. So I turned the monitor off and on and it then work for about 30 secs and then went blank again. So I took the monitor apart and saw that the power supply looked like it had got very hot as the metal around it was brown. I don't know if this is normal in a monitor. The power supply is 200-000-170DTL1 Version:A+. Also I have noticed that the 220uf 25 v capacitor is gone. What should I do, should I change the cap...
-
Re: Mag LT916s Model 900p 19" LCD dropping like flies
I have a Hanns G 19" inch monitor i bought it second hand form a car boot. When I got the monitor home I plugged it in and the monitor worked for about 5 mins. Then it went blank. So I turned the monitor off and on and it then work for about 30 secs and then went blank again. So I took the monitor apart and saw that the power supply looked like it had got very hot as the metal around it was brown. I don't know if this is normal in a monitor. The power supply is 200-000-1700TL1 Version:A+. Also I have noticed that the...
Leave a comment:
No activity results to display
Show More
Leave a comment: