Re: Panasonic TH-P50ST30A Not turning on, no error code!
I'll check the problem solver on page 33 from the manual you provided tomorrow.
Just looking into the future, any idea where the best place to source a replacement A board?
Cheers
Chris...
Beavisjem
New Member
Last Activity: 01-13-2014, 06:15 AM
Joined: 01-12-2014
Location: Brisbane
-
Re: Panasonic TH-P50ST30A Not turning on, no error code!
Right just tried disconnecting the power from both the SC and SS, plugged it in and turned it on and the same result.
No lights, nothing, just the usual relay click.
ChrisLeave a comment:
-
Re: Panasonic TH-P50ST30A Not turning on, no error code!
Hmm I had it open several times, so chances are slim. Not that the screws are burred but they show signs of being undone.
Thanks for the advice anyways
Chris...Leave a comment:
-
Re: Panasonic TH-P50ST30A Not turning on, no error code!
Just disconnect the power to the boards? Or the power and the ribbon?
ChrisLeave a comment:
-
Re: Panasonic TH-P50ST30A Not turning on, no error code!
Hi Tom,
Which one would be the SN board?
Cheers
Chris...Leave a comment:
-
Re: Panasonic TH-P50ST30A Not turning on, no error code!
I just pulled the back off and tried what you said.
I disconnected the SC and via power and ribbon cable and no change. Just the usual relays clicking.
Just so I know what I should disconnect and which board I am messing with, here is a picture from Panasonic of the back of my TV with the boards labeled that I am using.
[URL=http://s3.photobucket.com/user/Beavisjem/media/TH-P50ST30A_zps01a5a8bc.png.html][/URL]
I don't see an SC2 board? But I tried what you said with...Leave a comment:
-
Panasonic TH-P50ST30A Not turning on, no error code!
Hi guys,
I'll give a little back story for my problem.
I have a Panasonic TH-P50ST30A that is 2 years old and after a big storm the other day (Brisbane, Australia) the Tv turned off. When I initially notice the TV wasn't working. (out in the garden sorting something out) The display was blank and the green light was on.
I switched off the TV to avoid being damaged by the storm. After the storm passed I tried turning the Tv on and only heard the relays click but nothing on the Tv no picture, no blinks, no power light nothing.
The Tv... -
Re: New Members - please post your introductions here
Hey guys, been using this forum a few times for some information so I thought I would take the time to sign up.
Currently got a Tv thats got some issues. Hope with the power of the forum I can fix them.
Cheers
BeavisLeave a comment:
No activity results to display
Leave a comment: