Re: Problem with Enermax EG365P-VE

Hi KeriJane,

I'm now using the Enermax as my 2nd PSU to power my hard drives, DVD writer, Vidcard and Cooling Fans and the Zalman as my 1st to power my motherboard... Its working fine now. I did attached the Enermax to power an intel quad to see if it has the same problem and it worked with no problems, stable voltages.

As for using an old PSU with new mobos, I'm not a big fan of the newer dual 12v rail PSUs, the reason is due to the so called "dual rail myth", that's why I'm using a "2 PSU" configuration...

Re: Problem with Enermax EG365P-VE

@KeriJane,

Thanks for the TIP!

Yes its quite an old PSU model, got it brandnew in 2005... But its still in mint condition for I'm just using it to test brandnew motherboards before being sold, I haven't connected it permanently to a PC before, just now when I decided use it on my dual core and go for a dual PSU configuration rather than buy those expensive dual rail PSUs with only 18amps each more or less on both its 12v rail... the EG365P-VE has 26amps on its single 12v rail, and so as not to overload it, I'm using...

Hi! been lurking around this site for quite some time now, learned lots of things... This will be my 1st post...

I have an Enermax EG365P-VE PSu on my PC, when I turn my PC "on" after a long period of not being used, it turns on normally, If I continuously use my PC lets say for a day or so, its fine with no hicups even 24/7...

now here's the problem, If i decided to turn it "off" and turn it "on" a again after a few minutes, my pc will NOT turn "on", I have to wait an hour before I could turn it on again...

...