Re: PANASONIC Th-p50g10 6 red blinks
Did it TW but its the same also now when i take off ribbons it cuts out before the fans and boards would keep going?Any ideas?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: PANASONIC Th-p50g10 6 red blinks
picture.....[ATTACH]84096[/ATTACH]...
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Thanks TW heres the picture the 5th leg is on the left 5 down from the top right?It says 1 on the board at the top left!![url]https://www.badcaps.net/forum/images/editor/insertimage.gif[/url]Re: PANASONIC Th-p50g10 6 red blinks...mage.gif[/url]
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Them chips too small for me to solder but i like the idea of isolating pin5 think i will give that a go have the board out now anyway will let you know later.THANKS.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Ok thanks TW i will try 9004 and then board if no good. Thanks for all the help will let you know as soon as it fires up!!!!
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Thanks for picture TW. Just tested it got about 4.55 left and 4.75 right.Does that give us any help?Thanks.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
TW the ohms are 22.1 how you knew that i dont know!lol is that supposed to be their? Hooked everything up same symptoms turns off. Now looking for 9110.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
photo upside down its the brown thing next to right hand green cylinder.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
heres the picture tw make your life a little easier what you think about that critter?...
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
TW thanks i just tried voltage test on sos6 with the 3 ribbons off and i get no voltage at all! ic9004 have not found yet wish i was a pro like you!!! Something you might be interested in on my sc board someone has added a small brown thing with stripes on it looked odd.Well if you go to thread 17 and look at the great picture you gave me the 3 green cylinders next to each other, go to the left one and above it theirs a ic black with about 9 legs each side well the bottom left leg has this thing soldered to it and it goes to the small black square...
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Took off sc20 ribbon only still got 6 blinks.Then took off all 3 ribbons started normal no picture 2 green lights on fans on so i switched it off no blinks no red light.Fired up steady red light power ok fans on greens on switched off no lights.Does this prove A board or do i need to do your ic9004 test?Thanks.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
TW took off 3 white cables from A board not the other 3 you mentioned tv stayed on 2 green lights fans stayed on no picture of course when switched off no blinks!!!Does that mean A board is bad?....thanks....CHRIS.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
tw if i take the 6 wires off and do the test what is that going to tell me? This tv is annoying me first i thought it was power then a board then sc board now i have no idea!!! Even when i follow panasonic manual the results are off!!
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
ok tom so whats the next step?
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Thanks for the diagram sos6 TW just checked it power on 6 second delay goes to 4.75 volts for about 2 seconds then goes to zero does this give any clue? Let me know so i can do your tests with 31 32 33 ect later...............thanks...CHRIS.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
tv on its the su or sd board not sc as i said above!No power is sc board.
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Ran the test for su sd sc board it says after isolation tv on its the su or sd board.Tv not on replace sc board.Well it fires up as before green lights on NO FANS THIS TIME then turns off and green light fades.So i am none the wiser after running the panasonic tests!!!!
Why does it fire as soon as plugged in why the on off switch not working?If a quick fire up counts as power then its sc board if not im still in the dark!!Even when you go by the book it can still be wrong!!!!
Leave a comment:
-
Re: PANASONIC Th-p50g10 6 red blinks
Now getting 6 blinks after second test which is either su sd or sc board have not isolated boards to do test yet! The voltage at sc2 starts at about 10 and fades lower very slowly.No idea where sos6 is other than it leads to the big flat lead that goes to a board.Why does the tv turn on as soon as its plugged in? Here relay click 10 second delay green lights go on fan goes on and off 2 seconds then the green lights slowly fade!
Leave a comment:
-
making the picture to post
half the time when i do the picture it wont work what a stupid way use letters like everybody else!!!!!!!!!!!
-
Re: PANASONIC Th-p50g10 6 red blinks
Looks like its the A board service manual says no osd check lights which are good so it says A board.I then used flowchart from tw2005 after 2nd test i got 8 blinks which says A board! So between tom and sw i think you may have done your magic again thanks.........chris. Now have to find a board at good price!
Leave a comment:
No activity results to display
Show More
Leave a comment: