Hello badcaps community, it’s Zeeehash , I’m always into electronics and repairing my stuff (pc/lap/mob) by myself so thankful for your work here
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hello hello. I've decided to expand my skill set and get into electronics repair. Thanks for allowing me to join this community.Comment
-
-
Comment
-
Hello! Looking to have a good time while reading this forum, seems fun!
Background: Electric engineer with a hobby of fixing stuffComment
-
Hi, Everybody. I'm looking for macbook schematic to try to repair by myself
Thanks all !Last edited by iyahoo70@naver.com; Yesterday, 09:06 PM.Comment
-
Hi to All,
I'm into solar/automation/electronics, and cars and welding. And self-sufficient living whenever possible. And anti-establishment stuff.Comment
-
hello everynyan. how are you fine thank you.
im asus' biggest hater ong. bought a high end laptop and it ended up having bad ram chips and they want me to pay a 100 bucks just to tell me it has bad chips when i know its just that. id rather have a broken laptop than pay them a 100 just so they can then tell me to pay 800 for the motherboard replacement.
anyways thats the origins story of how i ended up making this account lol.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment