Hi All
my English is not very good but I will try...
Just Electrical Background, I like to learn, test, use, destroy anything related with electrons and software, not very good communicating, prefer to be isolated rather than big communities. I like to help others when I can. I like reading technical stuff.
Right now I am learning about firewalls but while reading my LG display monitor stop working and is playing dead. I like more the Old Benq monitors since they work long periods with me.
Hello, I'm Arshimet. I am the founder of Alvagen and an expert in laptop repair. I specialize in fixing technical issues for brands like MSI, Monster, Acer, Lenovo, and Dell, including motherboard repairs, LCD screen replacements, blue screen errors, and case repairs.
In addition to hardware repairs, I am also a software development and cybersecurity expert with extensive knowledge of HTML, CSS, and JavaScript. To share my experience in software development, I am creating a comprehensive educational series on .NET C#. My goal is to teach C# from the fundamentals to an advanced level, helping aspiring developers build their skills.
With my passion for technology and problem-solving, I strive to provide the best services in both computer repair and software education.
Feel free to contact me for inquiries or collaborations.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment