Kd-55x80j

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Elroy
    New Member
    • Dec 2013
    • 6
    • Belize
    #1

    Kd-55x80j

    Morning how to remove back cover for Sony Bravia KD-55X80J.
    I already remove one screw and the four that holds the wall mount. It lift a little but don't know what clip or lock is holding it together
    Tags: None
    • kasfamily
      Badcaps Veteran
      • Aug 2014
      • 765
      • Russia
      #2
      Re: Kd-55x80j

      https://www.manualslib.com/manual/21...?page=3#manual

        Comment

        • kasfamily
          Badcaps Veteran
          • Aug 2014
          • 765
          • Russia
          #3
          Re: Kd-55x80j

          ...
          Attached Files

            Comment

            • Elroy
              New Member
              • Dec 2013
              • 6
              • Belize
              #4
              Re: Kd-55x80j

              Thanks

                Comment

                • zape
                  Senior Member
                  • Jul 2017
                  • 176
                  • USA
                  #5
                  Re: Kd-55x80j

                  Were you able to remove the cover?
                  I tried to follow the manual but still can not remove the back cover.

                  Another question. If the TV shows 6 red blinks, does this mean it's bad LEDs and they need replacement?

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12145
                      • U.S.
                      #6
                      Re: Kd-55x80j

                      Maybe that will help:

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • howardc64
                          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                          by howardc64
                          Problem

                          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                          08-04-2024, 10:36 PM
                        • acedogblast
                          Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
                          by acedogblast
                          This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

                          There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
                          11-02-2024, 05:13 PM
                        • longmt1990
                          Panasonic Cf-w5 bios password remove
                          by longmt1990
                          Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
                          I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached

                          Please help me remove bios password.
                          Thank you so much
                          07-06-2025, 10:50 PM
                        • Maxpower3
                          Hantek 365 Remove screen on startup
                          by Maxpower3
                          every time I open the tool, I have the screen that appears
                          and I am always in a hurry to use it so I click and it automatically sends me a link to the manufacturer.

                          It annoys me lol.

                          2 solutions to remove it.

                          Either you remove pic.bmp and it no longer appears so no more links when clicking.

                          ​
                          or else you can modify the exe to remove the .bmp


                          hope this helps users...
                          01-15-2025, 03:24 PM
                        • Delicieuxz
                          I replaced all electrolytics in subwoofer, still get a hum in speakers - audio clip
                          by Delicieuxz
                          I get a faint, low hum through my PC speakers, which connect to the subwoofer in a 2.1 speaker system. The hum drives me crazy and makes me stressed. When I turn off the subwoofer, everything is quiet and I start to relax, lol.

                          Here's an audio clip of the sound coming from my speakers:

                          https://vocaroo.com/16HaryHwTx78

                          I recorded with my phone's mic right next to the speaker, and the mic picked up a lot of speaker noise over top of the hum. But I don't hear that noise in the room, I just hear the lower-pitched hum that's buried beneath all the other...
                          11-15-2023, 09:50 PM
                        • Loading...
                        • No more items.
                        Working...