Vizio M60-C3 multiple symptoms leading to death

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ossroy
    Member
    • Feb 2019
    • 18
    • United States

    #1

    Vizio M60-C3 multiple symptoms leading to death

    Initially, I had an issue last winter where, when the room was cold, the TV came on but continuosly scrolled through the inputs. Slapping the back of the lower left where the KB board and light are would solve things until the room warmed up and things worked fine.

    Then recently it started coming "on" but no picture, just backlight. Turning it off and on again fixed things. Then it got worse, where I'd have to cycle power several times to get picture. Then I got the dimming light and sometimes flashing after dimming. Again, cycle power a few times and it would eventually work fine.

    Now it is dead. I took off the back and started measuring. The only low voltage I get is about 3.3v and 2.something on a few pins leaving the PS. But those voltages make it through the MB to the KB board, so I'm guessing that's the stand-by voltage and my measurements may be normal for a unit that is off. Not sure where to go from here. I'd like to hope it's the PS because it's probably cheaper than a MB or even fixable. I saw one YouTube video where the guy just replaced the 4 identical caps at upper-right on PS and fixed it. Based on all those progressing symptoms, any thoughts?

    Roy
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: Vizio M60-C3 multiple symptoms leading to death

    I would try heating your main chip and see if tv comes on.
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • Nick's Tvs
      Badcaps Veteran
      • Jan 2014
      • 621
      • USA

      #3
      Re: Vizio M60-C3 multiple symptoms leading to death

      There are 2 common problems. #1 is bad caps on the power supply. Check out the power supply. If no bad caps then most likely problem #2 is the mainboard. In this case, you probably need to reflow, reball, or replace the processor chips under the heatsink.

      I made a super quick and easy-to-follow video tutorial on how to identify the bad board for these model tvs without needing equipment, but instead just based on symptoms. This should help tons since you can see what I talk about visually. Hopefully, it doesn't break bad caps terms.

      https://youtu.be/un7OJLTWtJY

      Comment

      • ossroy
        Member
        • Feb 2019
        • 18
        • United States

        #4
        Re: Vizio M60-C3 multiple symptoms leading to death

        Thanks guys. Sure enough, on closer inspection those four caps were bulged. Just ordered a 20 pack from Amazon for $5.99 and they'll be in my mailbox day after tomorrow. Sweet!

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • SS454
          vizio e650i-a2 backlight flashes then turns off
          by SS454
          vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.

          panel: au optronics T650HVN05.4
          72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
          link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1

          Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
          https://www.shopjimmy.com/vizio-56-0...-power-supply/

          Vizio 55.75J01.001G (91.75J10.004G) Main Board...
          08-20-2020, 03:57 PM
        • howardc64
          Vizio SmartCast TV software bug that looks like hardware
          by howardc64
          Bug looks like hardware so thought I posted it here. Exact same behavior on 2 different model 4K Vizio TVs running their SmartCast smarttv software. After launching youtube app, press vizio button on remote to return to the smarttv menu, once in awhile, a column of bad pixels will show for few seconds on the left hand side.



          It seems the vizio software is reinitializing hardware when returning to the smarttv menu. In general, SmartCast software isn't very good. Also will randomly (relatively infrequent) get no network connection when on wifi and require reboot....
          11-16-2024, 05:17 PM
        • Novabeau 2
          Vizio e55u-d2 55 inch tv service manual & schematic
          by Novabeau 2
          Hello everyone, I'm trying to find some service manuals or schematics for a vizio e55u-d2 55 inch tv that just conked out the other night. It has no power whatsoever.

          Have tried all the reset process that vizio had.

          Any Insight to this would be great and appreciated. If you all think it's not cost prohibited to fix let me know. known thank you and have a wonderful day.
          04-21-2025, 05:50 PM
        • Garret Matt.
          VIZIO (V555-H1) Television with odd cascading display fault
          by Garret Matt.
          Hello,

          I'm working on a Vizio Model V555-H1 that displays a cascading series of horizontal lines when first powering on. These lines appear to be in the shape of the Vizio Logo and descend until reaching the logo before resetting to the top and continuing their descent. I have reseated my TCON board and dusted connections but still have this fault displaying. I'm familiar with vertical lines but this one is a new one for me. My research into this problem hasn't yielded results as keyword searches point back to vertical line problems.

          Anyone have any recommendations? I...
          04-04-2025, 02:56 PM
        • Loading...
        • No more items.
        Working...