UART? Sony KD-OLED A1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Formaster
    Senior Member
    • Jul 2021
    • 68
    • Switzerland

    #1

    UART? Sony KD-OLED A1

    hello guys,

    Possible a UART log on these Sony models? If yes, on the four pin or jack?

    The TV has no life sign, even no LED feedback. On the MB all voltages stable and 5V-3.3V-1V still present. I thinking on completly dead CPU, memory or EMMC problem.

    (MB: 1-982-096-11)
    Attached Files
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6343
    • Germany

    #2
    Re: UART? Sony KD-OLED A1

    yours thought could be wrong... did you test the PCB as standalone?
    did you test the OLED Module as standalone?

    post photos on whole tv boards to show how they are connected... and clear photo of the PCB and T-CON driver broads specially the socket schematic to show the label printing of the listed voltage.

    you can read my posts over this threat start post #4
    Last edited by Diah; 04-10-2022, 05:45 AM.

    Comment

    • Formaster
      Senior Member
      • Jul 2021
      • 68
      • Switzerland

      #3
      Re: UART? Sony KD-OLED A1

      Yes, tested the PCB as standalone, don't have the tool for testing the OLED Panel alone. My thoughts is PCB issue, EMMC or dead CPU/RAM etc. UART log would be helpful. All connectors used if mounted, there is no free.
      Attached Files

      Comment

      • Diah
        Badcaps Legend
        • Feb 2013
        • 6343
        • Germany

        #4
        Re: UART? Sony KD-OLED A1

        Originally posted by Formaster
        Yes, tested the PCB as standalone, don't have the tool for testing the OLED Panel alone. My thoughts is PCB issue, EMMC or dead CPU/RAM etc. UART log would be helpful. All connectors used if mounted, there is no free.
        OLED Panel Module doesn't need any extra tool for testing.. same way to PCB standalone test.. MB disconnected totally from system and <24 / 12V from PCB to t-con direct.

        how about socket CN232 !! it had test points close to it.

        Comment

        • William1967
          Badcaps Veteran
          • Nov 2017
          • 203
          • Netherlands

          #5
          Re: UART? Sony KD-OLED A1

          Did you try to start the recover mode? A lot of the Sony models including this one have problems with the EMMC, I have repaired a lot of them and only 1 had a different problem, the rest had all a EMMC problem.

          Comment

          Related Topics

          Collapse

          • Morosan Dimitrie
            Sony KDL 55W-955B Sony EMMC dump search :)
            by Morosan Dimitrie
            Hello guys, can someone help me with an eMMC dump for a Sony KDL55W-955B TV, I tried to read the original memory with the RT809H but it shows me that it only has 1888MB even though it should have around 3.8GB. On a new memory it shows me 3776MB. From what I found on the Sony page, the following models could also be compatible:

            KDL-65W955B, KDL-55W955B, KDL-60W855B, KDL-50W805B, KDL-42W705B, KDL-32W705B, KDL-48W605B, KDL-40W605B, KDL-60W605B, KDL-55W805B, KDL-42W805B, KDL-48W585B, KDL-32W706B, KDL-42W706B, KDL-42W815B, KDL-42W817B, KDL-50W815B, KDL-55W815B, KDL-42W828B, KDL-42W829B,...
            06-08-2024, 04:13 PM
          • Lanparty
            Emmc RT809H and Sony kd55x8505c SK Hynix H26M52103FMR
            by Lanparty
            Hello guys
            One million dollars question.
            The problem is I have this tv with almost dead Emmc if I hold Vol - and Power button for about 40 sec. it goes in Recovery mod but does not want to boot from USB . I read the Emmc H26M52103FMR 16Gb and shows that User date is damaged corrupted. I have bought the same Emmc I copied all Boo1 Boot 2 and CSD_EXT file 512 kb from oem old emmc and the user date 14.6Gb from another dump but same model TV. Reballing reading and writing went without any problems but when I soldered back on PCB the TV does not go even in Recovery mod totally dead.I...
            04-22-2021, 08:56 AM
          • joby91
            SONY KD-55AF9 OLED MAIN-BM3-1-983-356-11 EMMC Firmware
            by joby91
            Hello,

            I have SONY KD-55AF9. Mainboard MAIN-BM3-1-983-356-11 with defekt EMMC.
            I wanted to buy new EMMC and Flash the firmaware on it. Does anyone have the firmware for this TV. I would be really grateful.

            I found one chat about firmware on ************** forum but i cannot read the comments.

            https://**************/forum/108-114100-1#880537


            09-04-2024, 01:34 PM
          • PontyPCs
            Sony Android TVs eMMC Issues
            by PontyPCs
            Hi people.

            I have been trying to get my head round these issues with the eMMC putting the TV in to a boot loop condition, or completely dead, when a dump of the Boot 1, Boot 2 and USERDATA partitions have been made, the MLC lifetime counter has been reset, using the original eMMC with the RPMB partition intact and the eMMC is flashed with the original dump, Netflix and a few other Apps don't work. i assume all the DHCP keys and factory programmed RPMB access Key will be contained within the original dump, and as we are re-flashing the original eMMC i would expect every thing to work....
            12-10-2023, 10:43 AM
          • Alex500
            Sony kd-55xf9005, does it have any uart connections?
            by Alex500
            Good evening, I have a bricked sony bravia kd-55xf9005, the motherboard code is 1-983-249-21.
            While poking around the web, I came across an old video showing a sony bravia connected to a TTL converter, which in turn was connected to a Putty session.

            Is there any chance that my motherboard also possesses a UART input? I found a port that somewhat resembles the one I am looking for; it is located near the optical audio.
            If I could get access to the terminal, I could force a firmware update.

            Many thanks...
            07-02-2024, 05:42 PM
          • Loading...
          • No more items.
          Working...