LG Plasma 42PC3D

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • indypctech
    Member
    • May 2010
    • 18
    • USA

    #1

    LG Plasma 42PC3D

    i have a LG Plasma 42PC3D that was working fine till today the screen has gotten dark i have taken a picture


    do you think this has something to do with Z sustain failure
    Attached Files
  • NxB
    Badcaps Legend
    • Feb 2009
    • 1595

    #2
    Re: LG Plasma 42PC3D

    Yes, it is z sustain failure.

    Comment

    • indypctech
      Member
      • May 2010
      • 18
      • USA

      #3
      Re: LG Plasma 42PC3D

      thank you will order part today

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271

        #4
        Re: LG Plasma 42PC3D

        For us, newbies, how can you tell it is a z sustain failure?

        Originally posted by NxB
        Yes, it is z sustain failure.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

        • PlainBill
          Badcaps Legend
          • Feb 2009
          • 7034
          • USA

          #5
          Re: LG Plasma 42PC3D

          Originally posted by retiredcaps
          For us, newbies, how can you tell it is a z sustain failure?
          The symptoms. The very dim picture (sometimes a picture is only visible in the lower right corner) is very characteristic of LG Electronics TVs using the 6871QZH056A (or B, or C) Z-sus. Either replace the board, or replace the hybrid.

          PlainBill
          For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

          Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

          Comment

          Related Topics

          Collapse

          • Keshenatech1
            LG 50PJ350 plasma blowing Y-Sustain board
            by Keshenatech1
            Hi, I was wondering if there's anyone here with experience on the LG50PJ350 plasma or similar models? When it came in, it had 7 shorted mosfet outputs on the Y-sustain board, Q02, 04,11, 22, 24, 26, and 28 were all dead shorted. I replaced them with the exact same type, checked their surrounding area for other open and shorted components and didn't see any further problems. But as soon as I hit the power button on the remote, I had a loud Pop! and Q22, 24, 26, and 28 are shorted out again. The other 3 seem to have survived. Someone on another forum had suggested the possibility of a shorted panel....
            05-13-2020, 10:08 AM
          • theone111
            Problem with LG Plasma 60PM6700 - Random power downs
            by theone111
            I have an LG Plasma TV 60PM6700 for the past ~12 years.

            In the last ~3-4 months I have been having some issues.
            1. Problem: It started with random picture disappearing (sound still worked).
              Frequency: Happened about once a week.
              Solution: Had to turn off TV wait a few seconds before turning it on again.
            2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
              Frequency: Happened about once a week.
              Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
            3. Problem: TV shuts down
            ...
            07-22-2024, 10:36 AM
          • pixelcap
            Pioneer Plasma 111FD To Solder or Not to Solder.
            by pixelcap
            Hello out there in Badcap land.

            I have a Pioneer plasma that gave me the dreaded 8 red blink and shutdown, I have been trying to trace the failure points. On my last inspection while replacing a Y Sustain Board I noticed on the original and replacement board some missing solder, the points of connection
            are from the Digital Address Board and the Buffer Boards. I have included the pictures, should I resolder these points or are they unsoldered intentionally? Any help would be much appreciated.

            Thank you

            Pixelcap...
            03-08-2025, 07:10 PM
          • Sus256
            HISENSE 65E7KQ PRO - no boot
            by Sus256
            Hi all!

            HISENSE 65E7KQ PRO
            RSAG7.820.13512 - chassis
            MT9618BAATAB - cpu
            RSAG7.820.12059 - power
            HD650Y3U77 - panel
            KLM8G1GETF - emmc

            The TV does not turn on, the standby indicator is on. All voltages are present.
            Emms is dead. Not readable, not detected.
            Replaced emmc.
            But with another dump there is no launch

            Terminal log

            UART
            <
            AC_ON
            RPMB key is not yet programmed

            HASH1_VERSION=0x00000000 64bit
            E-B
            FDE enabled
            layout pattern onebin by SAR7,0...
            06-01-2025, 02:11 AM
          • ctroxtell
            Carrier HK50AA063 display controller common failure help
            by ctroxtell
            I've got a control display for a Carrier chiller that I'm trying to understand what the common failure with these boards are. This is the board in question https://www.supplyhouse.com/Carrier-...arquee-Display all of them seem to develop a failure with the up and down arrow buttons on the right side of the display, the esc and enter keys I've never seen fail. Once these boards are plugged in they run 24/7, you used to have to press extremely hard with the end of the blunt screwdriver and you could still get the arrows to work but now it has completely stopped working. The button...
            02-05-2025, 05:31 PM
          • Loading...
          • No more items.
          Working...