Technika 40-E271 menu not responding

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stav242
    Senior Member
    • Jan 2014
    • 61
    • United Kingdom

    #1

    Technika 40-E271 menu not responding

    Hi
    See attached.

    Powers on and TV repsonds to remote buttons - but just recently the menu has stopped displaying. Only this grey box moving round the screen.

    Tried the firmware flash files on eeprom thread but can't see what's happening.. if anything.

    Tried factory reset remote proceedure, but again TV seems to respond but can't see anything happening.

    Any ideas?
    Attached Files
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4752
    • Russia

    #2
    Re: Technika 40-E271 menu not responding

    Try to reprogram Flash: W25Q32BVSIG through the programmer, if you need a dump, I'll post it here.

    Comment

    • stav242
      Senior Member
      • Jan 2014
      • 61
      • United Kingdom

      #3
      Re: Technika 40-E271 menu not responding

      hi, yes please. that would save me some time. thanks.

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4752
        • Russia

        #4
        Re: Technika 40-E271 menu not responding

        Try Dump, write to new spi flash.
        Attached Files

        Comment

        • vinceroger69
          Badcaps Legend
          • Mar 2012
          • 6714
          • uk

          #5
          Re: Technika 40-E271 menu not responding

          This thread also has a firmware link if needed

          https://www.badcaps.net/forum/showth...ht=tcon+eeprom

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4752
            • Russia

            #6
            Re: Technika 40-E271 menu not responding

            It turns out that this TV has two different motherboards "T.MSD 306 69A 12023" and "TP.MSD309.BP86"

            Comment

            • jimbofz
              Badcaps Veteran
              • Apr 2013
              • 539
              • uk

              #7
              Re: Technika 40-E271 menu not responding

              Originally posted by vinceroger69
              This thread also has a firmware link if needed

              https://www.badcaps.net/forum/showth...ht=tcon+eeprom
              beat me to it vinceroger,
              just about to point him to my earlier post ,
              good man

              Comment

              Related Topics

              Collapse

              • Document Archive
                LCD LED TV Service Menu Codes
                by Document Archive
                ALL LCD LED TV SERVICE MENU CODES

                Service Menu Code with Board Name

                China Universal Board / Jumper Board Service Menu Code
                Changhong Ruba Service Menu Code
                Ecostar LED TV Service Menu Code
                Orient LED TV Service Menu Code
                Haier LED TV Service Menu Code
                TCL LED TV Service Menu Code
                Samsung LED TV Service Menu Code
                LG LED TV Service Menu Code
                Videocon LED TV Service Menu Code
                Supra LED TV Service Menu Code
                Toshiba LED TV Service Menu Code
                Symphony LED TV Service Menu Code
                Veste/ LED TV Service Menu Code...
                10-31-2024, 03:58 AM
              • Robby-Gr
                TV Samsung UE55HU8500L (2014) – service menu + firmware reflashing advice needed
                by Robby-Gr
                Hi all,

                I’m trying to recover a Samsung UE55HU8500L (curved UHD, 4K model from 2014) after replacing the panel. The new panel is a 55A1UU8EH, which produces excellent image quality — very close to the original.

                However, since the swap, the TV enters a boot loop (Samsung logo → restart) unless I enter the service menu and perform a reset.

                The service mode had been previously modified — possibly by a technician or during the panel swap — and I suspect some key settings are mismatched for the European (Greece) market.

                Additional issues:...
                09-27-2025, 12:02 AM
              • Retro140
                Unnlock Menu for 2007 DU-27FB32C comerrcial CRT TV
                by Retro140
                Hello,

                So I was referred here when I made this poste over on AVForums: https://www.avsforum.com/threads/loc...lg-tv.3257234/

                To summarize, this is a commercial TV and I can't get a menu of any kind. I know the overlay is working because when I change channel, adjust volume, turn on sleep timer I do see text. But I have not ever seen the user menu nor the installers menu. I've tried a bunch of remotes(more info on the AVF post) and tried every button...
                06-18-2023, 06:13 PM
              • Ierwin
                Philips 58PUS7805 Menu working but no/weird picture from video sources
                by Ierwin
                Hello everyone,

                I got a 58pus7805 that shows some weird behavior.
                The menu and remote work fine and the picture is looking crisp and flawless while navigating the menu.
                However, when a video source is displayed the screen either goes solid green (HDMI), solid black (SAT TV) or shows some fragments on mostly green background (AVI Playback from USB).

                I tried to reinstall the firmware through the menu which was rejected saying it already had the latest version.
                I managed to install the latest official firmware by holding the control button while plugging...
                03-10-2024, 12:50 PM
              • vf fa
                EIZO CX270 - No signal but Backlight and Panel works, logo works, admin menu works. OSD doesn't. What?!
                by vf fa
                Hi, so i guess I´ll have to make a new topic here, as i browsed through hundreds of other threads but couldn't find a solution to my problem yet.

                I got a EIZO CX270 from a friend. He said it doesn't work anymore and wont display any signal or take any OSD inputs. Well, as an aspiring photographer I couldn't say no, could I? Thought it was an easy game, replace a bad cap and have a working monitor. But nooope, it wasn't supposed to be this easy.

                So let me start with the problem description. I'll try my best not to skip anything so this might get rather long.
                ...
                01-31-2024, 01:40 PM
              • Loading...
              • No more items.
              Working...