Hisense 507D

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wirphotos
    Member
    • Sep 2019
    • 18
    • United States
    #1

    Hisense 507D

    Picked this tv up from a family member. Tv was working fine and then they started having issues. Tv would turn on, show an image and shortly after it would shit down.

    I've done some research and did a system reset. The screen comes on and the video is fine in setup. I've had it already where I could watch tv on it for a 30 hour. Other times it will turn on show the splash screen and shut down.

    I'm at a lost as it works great after a full reset, but then after a while it goes back to it's old ways.

    Help!
    Tags: None
    • Sibiemofokeng
      New Member
      • Mar 2020
      • 5
      • South africa
      #2
      Re: Hisense 507D

      Maybe the main board is the same as 55A7,after replacing the new main board of this tv it played well for one day, the following day when I switched on the screen shows no picture but backlight was there on,I cleaned the cables from t-con board to screen thereafter picture came back.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • JunkmanJimbo
          Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and won't turn off
          by JunkmanJimbo
          Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and then tv won't turn off.
          No picture. No sound that I can tell. Backlights are on and have been checked. Flashlight test no image on screen. I replaced the Eprom chip hoping that was the problem but nothing changed.
          Please help. Thanks in advance!
          Yesterday, 11:45 AM
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • reformatt
          Macbook Air M2 A2681 Kernel panics after screen replacement
          by reformatt
          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
          07-31-2025, 08:37 PM
        • Scruit
          Does the Oak OTI067 have a splash screen / initialization message at bootup?
          by Scruit
          tl;dr ... Question: Does the Oak OTI067 have a splash screen / initialization message at bootup?

          More detail:

          Working on "Uncle Sherman", my Mitsubishi MP-3200 386 from 1988. Before I start up old computers I have a process where I disassemble, test for shorts, visually inspect, capture EPROM images etc.

          My T866II+ give me a "pins not detected" error on the EPROM from the Oak-based (OTI067 GPU but apparently a no-name card??) I assumed the EPROM was bad, ordered a replacement and figured I'd program a downloaded ROM image to it....
          04-17-2022, 06:03 AM
        • smic717394
          iphone XS turns off when press on screen.
          by smic717394
          Hi,

          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
          07-25-2024, 10:16 AM
        • Loading...
        • No more items.
        Working...