Hi all how do I get into the service menu on this tv using this remote I've tried a few ways but can not get in
LG service menu on a 55uh770v
Collapse
X
-
Tags: None
-
Re: LG service menu on a 55uh770v
LG had 2 kind of service engineering menu & one command for reset... all cant be access from your normal RC- need service RC or there on android apk can be used with any mobile set had build in IR
so why you want to access to this menu? -
-
-
-
Re: LG service menu on a 55uh770v
could be & could be other reason such LED BL..
to reset eeprom and whole set to factory state need to send command IN_STOP following with code 0,4,1,3 we post over here many time apk for android or diy one on pc with .wave filesComment
-
Re: LG service menu on a 55uh770v
I'll use my old samsung s5 and see if I can get it too work what's the best appComment
Related Topics
Collapse
-
ALL LCD LED TV SERVICE MENU CODES
Service Menu Code with Board Name
China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code...-
Channel: Schematics and Boardviews
10-31-2024, 03:58 AM -
-
by intercepterHi,
I have JVC LT-32CA120
Board:Vestel 17MB171
I need rotate screen.It is possible in service menu and how to enter service menu?
Thanks. -
by sohail5307I need to open service menu of Dell laptops like image in attachment
Ignore my English
I want beacause i flashed mec5055 using rt809h now it's does not have service tag, but when I install service using F2 in bios setup after save service tag and press disable manufacturing mode using alt+f then battery chagring is permanently disabled. I want to resolve this problem... -
I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.
I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.
I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.
the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....01-13-2024, 01:57 PM -
Dear All,
FAFO is the correct definition of what happened with my Samsung UN70RU7100K TV, I was trying to change the region to enable samsung plus using the service mode, entered the mode mute 1 8 2 pwr, and started to dig in. Did some changes while having digital TV signal in the back instead of doing it in HDMI standby mode, I remember changing to a region different then mine but also had a different tuner $%&!. After rebooting the TV, it was all gone, now it shows the splash image and then no image at all. If i disconnect the lan cable from the back, a message is shown in the... - Loading...
- No more items.
Comment