Philips 60pfl6008k/12 NVM needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Alschepmist
    Senior Member
    • Jul 2018
    • 70
    • Germany
    #1

    Philips 60pfl6008k/12 NVM needed

    Hello guys i have problem with a philips 60pfl6008k/12 .
    The problem was a corrupted nand i have reprogrammed the nand with a generic qfu 1.2e la dump and the tv now works but i have a problem with the standby processor has anyone then NVM file backup from a working set? ?
    Tags: None
    • William1967
      Badcaps Veteran
      • Nov 2017
      • 203
      • Netherlands
      #2
      Re: Philips 60pfl6008k/12 NVM needed

      You mean this one?
      Attached Files

        Comment

        • Alschepmist
          Senior Member
          • Jul 2018
          • 70
          • Germany
          #3
          Re: Philips 60pfl6008k/12 NVM needed

          I dont know i have to test it do you mean that will solve my standby problem?

            Comment

            • William1967
              Badcaps Veteran
              • Nov 2017
              • 203
              • Netherlands
              #4
              Re: Philips 60pfl6008k/12 NVM needed

              No, that file is to reset the NVM , the optionnumbers are set to a standard number where the tv can start up with, after starting up the optionnumbers must be re-aligned. I don't think the stand by problem will be solved, the stand by problem is known to me and came with repaired mainboards from a big German reseller. I think that problem comes from the NAND software.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • courtcircuit
                  Philips HTS8000 home cinema noise problem
                  by courtcircuit
                  Hello

                  I have since a long time a Philips HTS8010S/01 which has been old but was doing the job.

                  Since a few days, it starts by making a weird "static" nois when switches on for a few seconds to a minute and then works like a charm.
                  Noise loudly outputs from the 3 channels, even if no signal is sent by the controler.DVD to the subwoofer/amp unit.

                  I was thinking of a soldering that was starting to be damaged and that was only doing the job after a few seconds of heating, most probbaly on the power board
                  Removed each of tyhe boards
                  ...
                  02-08-2025, 08:22 AM
                • theone111
                  Problem with LG Plasma 60PM6700 - Random power downs
                  by theone111
                  I have an LG Plasma TV 60PM6700 for the past ~12 years.

                  In the last ~3-4 months I have been having some issues.
                  1. Problem: It started with random picture disappearing (sound still worked).
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait a few seconds before turning it on again.
                  2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                    Frequency: Happened about once a week.
                    Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                  3. Problem: TV shuts down
                  ...
                  1 Photo
                  07-22-2024, 10:36 AM
                • bohaboha
                  PHILIPS 32pfl3403d Flat-panel TV Upgrade Assistant problem
                  by bohaboha
                  Hi trying to update my Philips cause in retail mode not possible to get out from it i get this message in update site : Error message: no data exception. Your reference: Request ID (server_1930105)
                  how to fix it thanks
                  02-05-2025, 09:23 PM
                • rattlesnake
                  Voltage issues SY-5SSM, where's the problem? Help needed
                  by rattlesnake
                  Hello everyone,

                  I'm trying to fix this SY-5SSM motherboard (Socket 7).



                  When the PSU is connected it powers on by itself but there's nothing on the POST card, no beeps.
                  The BIOS EEPROM is ok (latest BIOS was flashed).
                  All the jumpers are set ok.
                  All the 1000µF 6.3v (14) and 1500µF 16v (2) caps are in spec.
                  There are two 76129D MOSFETs (datasheet). I took them out and tested them and they are ok (no continuity from drain to source) in off state.
                  But the voltage in the gate of the second 76129D fluctuates between 1.468-1.649,...
                  01-26-2025, 11:26 AM
                • atkallu
                  Philips 58PUS8545 t-con problem or something else ?
                  by atkallu
                  Hello
                  I have a Philips 58PUS8545 which have a vertical moving lines on screen and it is flashing white vertical lines like a every 3-4 seconds.
                  See the attached image.

                  I removed left side flex-cable from the t-con and then there was half screen sharp and correct image and other half was white.
                  But when I removed the right side flex-cable then half of the screen was white but other half was white and above the white there was vertical lines on half of the screen.

                  T-con two flex-cables have been changed to cross but nothing changed, so it is not due those...
                  1 Photo
                  01-13-2025, 11:23 AM
                • Loading...
                • No more items.
                Working...