Bad LCD panel? Samsung LE37A556

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dominik0801
    Senior Member
    • Feb 2018
    • 98
    • Hungary

    #1

    Bad LCD panel? Samsung LE37A556

    Hello.

    Today I got a TV. To be more precise, I bought some bad TVs to fix then resell. This one arrived today.

    The seller only stated to have a negative color. Pictures were not attached of it tho.. this is where I f..d it up. I still bought it.

    Well, the TV didn't even turn on. The LED just blinked. Taking it apart I noticed, that cables are cut, the TCON "shield" is gone, PSU is bent horribly, and the AS15 chip was missing from the TCON board...

    Fast forward, I managed to fix most of the problems, put an AS15 on the TCON too, popped it in, turned on the TV, and finally it worked (kinda), but the picture was as you can see on the attached picture...

    I understand, that the AS15 chip I used could be also bad, however, what could be those 2 vertical lines? Is it from the TCON? Or the LCD panel itself?

    Because if it's not worth my time, I am just gonna try to sell the working parts from it..

    Thanks in advance, Dominik.
    Attached Files
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1505
    • united states of america usa

    #2
    Re: Bad LCD panel? Samsung LE37A556

    im not an expert but i would guess issue could be the bonded tabs on the lcd panel..i dont think vertical lines are tcon related

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12187
      • U.S.

      #3
      Re: Bad LCD panel? Samsung LE37A556

      Wonder if it could be a slight mis-alignment, try carefully cleaning and reseating the tcon ribbon cables and lvds cable from tcon to mainboard. Some use isoprophl alcohol or a pencil eraser, be careful they are delicate.

      Comment

      • dominik0801
        Senior Member
        • Feb 2018
        • 98
        • Hungary

        #4
        Re: Bad LCD panel? Samsung LE37A556

        I put this TV on hold, because I have 2 another LED TVs that I want to fix. After those are done, I will come back to this one.

        However, I tried cleaning the LVDS and ribbon cables between the TCon and the panel. That didn't change anything.

        But i am stubborn so I can not give up..

        if nothing works out, im gonna try to fiddle around and check if a tab is bad.

        Comment

        • shelby5041
          Badcaps Legend
          • Feb 2009
          • 1505
          • united states of america usa

          #5
          Re: Bad LCD panel? Samsung LE37A556

          my guess is the bonded tab is the issue in that area of the screen

          Comment

          • nomoresonys
            Badcaps Legend
            • Jan 2013
            • 12187
            • U.S.

            #6
            Re: Bad LCD panel? Samsung LE37A556

            Could be, hard to tell til you strip it down, inspect it, maybe put a little pressure on the tab, see if it changes any.

            Comment

            • shelby5041
              Badcaps Legend
              • Feb 2009
              • 1505
              • united states of america usa

              #7
              Re: Bad LCD panel? Samsung LE37A556

              Yeah snd stripping down can be very time consuming and psin in butt...nowadays sometimes its just not worth it since used working lcd tvs have very little value...here in usa used 32inch lcd tvs may sell for 25-50$
              And a 50 in lcd may fetch 75$
              Last edited by shelby5041; 10-08-2020, 02:53 PM.

              Comment

              • dominik0801
                Senior Member
                • Feb 2018
                • 98
                • Hungary

                #8
                Re: Bad LCD panel? Samsung LE37A556

                oh, the prices really differ then. here, in hungary, a 32" tv mostly sold at $70-$100.

                if i will have the mood, i will take a look at the tabs.. i just want to get back at least the price i paid for it.

                that guy really scammed me

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12187
                  • U.S.

                  #9
                  Re: Bad LCD panel? Samsung LE37A556

                  Oh, hell no, I wouldn't replace backlights on a 37 inch tv, unless I had a spot where only that size would work but never to try and sell.

                  Comment

                  • shelby5041
                    Badcaps Legend
                    • Feb 2009
                    • 1505
                    • united states of america usa

                    #10
                    Re: Bad LCD panel? Samsung LE37A556

                    Yeah usa is diff market...hell you can buy a brand new 32in lcd tv for 100 or less

                    Comment

                    Related Topics

                    Collapse

                    • Document Archive
                      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                      by Document Archive
                      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                      09-07-2024, 05:50 AM
                    • x_orange90_x
                      TCL 50S535 bad tcon or panel issue?
                      by x_orange90_x
                      Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                      03-29-2025, 11:02 PM
                    • advant
                      Driving a Sharp TCON/panel with a universal main board
                      by advant
                      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                      02-03-2020, 12:25 AM
                    • NWArkGuy
                      Samsung UN65TU8000 - Panel Issue [ hole in ribbon cable ]
                      by NWArkGuy
                      Well, I will be the first to admit that I screwed up...

                      In attempting to replace the backlight in a UN65TU8000, I made a hole through one of the ribbon cables between the board that runs along the bottom of the back of the TV and the panel. This lead to a between a 1/4 to 1/2 inch vertical stripe running the full height of the image.

                      I don't have the experience; personally, to solder a bridging wire for the paths that were cut. So, I have been on the hunt for other Samsung TV's of similar size.

                      I have 2 that I have found and have in my possession. ...
                      10-12-2023, 10:13 PM
                    • KYBOSH
                      Samsung UN50TU8000 - Dead Panel Forensic Questions
                      by KYBOSH
                      I came across a 50inch TU8000 that wouldnt start up properly (blinking stand-by light, backlights would cycle on and off).





                      When i opened it up and removed the power to the mainboard the backlights powered up and everything looked uniform.
                      When reconnected the mainboard but disconnected the flex cable to the panel i heard the TV startup with the intro sound.






                      Later I checked for shorts on the panel PCB boards but could not find anything.
                      When I took a look with the FLIR i noticed the 2 resistors...
                      08-10-2024, 08:39 AM
                    • Loading...
                    • No more items.
                    Working...